Maswell Cellular Panel Antenna 2X2 MIMO GNSS/GPS Combo 600-8000MHz IP67 UV stabilized 5G 4G LTE 3G and GNSS GPS GLONASS GAILEO Beidou 3 Leads LORA Helium Compatible with ATT Tmobile Sprint

Cellular panel included mounting hardware and three (3) 80" SMA Male to SMA Female Cable.I mounted the cellular panel to a pole and connected it to my AT&T 4G LTE router. I raised the panel and directed it towards my provider's celltower 5 miles away. I ran a diagnostic test and compared the readings. I recorded a 15% improvement in RSSI.This improvement in signal strength was encouraging especially when you consider I used the provided 80" cable.I wanted to secure the cellular panel to an antenna mast on a gable end mount; however, this would require a 25' cable length. I expect a 25% improvement in RSSI when installed.Note: J-Mount and longer cables maybe required to complete installation.Recommendation: Remove the 80" cables and lower the price.Removed 1 🌟 for price.

Easy to set up. Adds a solid two bars. Small and discreet. Easy to use

very easy to install and it does work! i used it to bring in signal inside the house and it worked perfectly. went from 0 bars to 3.

Wunder darf man nicht erwarten. Gegenüber dem Empfang im Haus wurde das Signal zum Router zwar etwas verstärkt, jedoch wurde bei mir deutlich, dass das Hauptproblem in der Überlastung der Basisstation von O2 liegt. Das kann nur O2 lösen, die externe Antenne hilft da natürlich nicht. 20 Mbit am Tage bei direkter Sicht auf den Sendemast in 200 Meter Entfernung sind für 5G ein Witz.

This item looks well made, the brackets are good, in my case I wish the initial fly lead was a bit longer and the extension lead was 5m. I could see a definite improvement in RSRP down by 5 RSRQ down by 2 and SNR up by 6 on band 7 + 78. However at certain times during the day the figures actually drop especially when my router decides to lock on to band 3. The antenna is currently around 3m off the ground, facing in the antenna direction, but not with a direct view. I'm thinking about going higher.

It works well as a 5G signal booster with the now standard 2x2 MIMO router from Three internet (NR5103Ev2, February 2024 - a new router that replaced a 4x4 MIMO router). Do use the short extender cable provided with the kit, it surprisingly made a difference in speed and reliability. I tried the other version by Maswell (the blue box) and this is so much better, that other one did not make a difference.

Couldn't work on tp-link ax3000 , short cables , found cheaper and better option.

I’ve been using this with a Huawei B535-333 router for the last month. It has been quite stable for the whole time. I replaced a single antenna with this Maswell one and noticed an improvement in the SINR values.The kit that is supplied with the antenna is excellent, the supplied extension cables are of good quality. I am impressed by the quality of the supplied antenna mounting bracket. Everything you need to mount the antenna is supplied in the box, except for the pole onto which you might mount the antenna. Though you could equally just mount it high on a wall.To get the best results out of this antenna, you will need to know where the transmitters are, then try the antenna in different places and orientations before you finally fix in place.The build quality of the antenna is very good, it being black for me means it is less likely to stick out like a sore thumb if it had been white.