HIRALIY 118FT Garden Watering System, Drip Irrigation Kits for Plants, New Quick-Connect Fittings, Blank Distribution Tubing, Saving Water Automatic Irrigation Equipment for Patio Lawn

I have two planters next to my garage (other gardens have sprinklers). Typically I would fill up a water can and water them before and after work.As this was sort of a pain, I decided to setup this mini sprinkler system. The included parts were perfect for my installation. I have a spigot splitter/"Y" with one side dedicated to this. When I want to use my hose I shut this side off and open the other side.There was enough large hose in the kit to run from the spigot to the manifold behind the planter, then enough small hose to run into the first planter, then up and over/around my garage door to the other.As a bonus, I was able to tuck the small hose in the siding j-channel so you don't see it.Now, I just turn on the spigot for a few minutes morning/night and I'm done. I could get a timer but I read it is bad for frost free spigots to be on all the time.The push to fit hose connections have not leaked and the system has worked flawlessly since install, sans once when I forgot to turn it off :)If I had one gripe it would be that the flow adjustment on the "sprinkler" head is just smooth turning - it would be nice to have a positive stop/click to hold the setting as when I set it up I had to take a few tries as the water pressure can knock it out of adjustment a little.I was going to piece a system together myself, but it came out to be way more than this all-in-one kit. In the winter I will blow out the line to prevent any damage.

This is a great set! I especially love the push connect fittings. The tubing is soft and pliable and very easy to work with. It’s the best set I’ve seen on Amazon or in the box stores. The only issue I have is that you can’t reorder specific parts. I needed more of both sizes of tubing as well as some splitters and plugs. Also, the large fittings were 15mm, which is pretty impossible to find. I actually found some clear flexible tubing in the plumbing section of Lowe’s that was ⅝” that fit the fittings and was able to use that but all of the ½” garden tubing I found was all too big. The ¼” tubing I found in black as well as white fit perfectly but the tubing was much stiffer, more like RODI tubing but not quite as stiff. I really wish this company would sell separate parts because the packs are not one size fits all. And I bought the largest pack available. I would have just bought another but I didn’t need all of the sprinkler heads, I needed other pieces instead. Selling 100’ rolls of both sizes of tubing as well as different kinds of fittings (including the hose connector and large plug) and plugs separately would have been perfect for me to build the set I needed along with the pack I purchased. Anyway. Out of everything I’ve bought to create my drip system for watering my pots and raised vegetable beds, this set was the best quality and easiest to use. I have 3 separate controllers on 3 spigots. I used every bit of the tubing, 3 of the large splitters and 31 of the drip heads provided plus 40’ of ⅝” clear tubing, about 50’ of ¼” white tubing and approximately 25’ of ¼” black tubing as well as hose connections, end plugs (small and large), and ¼” splitters that I bought separately. I have it running to 2 raised beds and a pot on our deck from one spigot, the left side of our front porch and flower bed pots as well as around the garage door to driveway pots on a second spigot and the right side of the front porch and flower bed pots on a third spigot. It took a little engineering and several Amazon orders and a couple trips to Lowe’s to get it all hooked up and working but it’s done. I also plan to run a line down the back yard to some berry bushes once we get those planted. I’ll need to buy more ⅝” tubing but I have a leftover large splitter as well as the sprinkler heads and a little bit of ¼” tubing. All in all this is a great set, would just be better if they also sold parts individually.

Easy to set up. Two of my 4 main connectors failed. I presume it was due to excessive water pressure from the spigot. Corrected this by repairing with water pressure tape to stop leaks. Kind of expensive fix when you are purchasing what you presume will work correctly. Needed irrigation system setup since unable to water for a few weeks....works well with adjustable heads/misters once I added a pressure gauge at faucet and this tape.

This was an inexpensive purchase. After spending hours setting it up it ended up leaking a bit too much. It was not as efficient as I expected. After some tape and patience it works.

I like the quick connect fittings, making it very easy to connect and disconnect. It has made setting up the drip system very easy compared to barbed fittings, and the sprinklers provide excellent control over the flow.

Simple and quick to install, good quantity of nozzles. Hose cuts easily with kitchen scissors.Took maybe 15min to install, good pressure and adjustment at each head regardless of where it is in the chain (running ~5 off one 1/4" hose). Another few feet of the larger hose would be nice, but there was just enough for my application to go up and over the greenhouse to the other side and run a bit along one side.It leaked when I first turned it on, so I removed the large hose from the distributor, cut the end straight, and pushed it all the way back in and all is well. If your cuts aren't clean, or are crooked it may leak... easy to fix or prevent if you check before inserting.

The media could not be loaded. Last year, I installed an older HIRALIY irrigation system where I had to soak the hose in hot water so I could pull it over the valves on the T-connectors. It was a pain, and was disappointed with the end result of minimal water pressure for sprinkler heads near the end of the line despite not exceeding the recommended number of sprinkler heads per line.This time around, installation was so much quicker and easier. No more soaking tubing in hot water. No more lines forcibly ejected from t connectors when the tubing got hot. The quick connectors are perfect, no leaks!The best part though, is that I can install the sprinkler heads in ring formation so there is absolutely no loss of water pressure from the first head to the very last!The only drawback is that individual parts like the US standard 3/4" thread to 15mm hose connector are hard to come by. For the particular application of a secondary irrigation system, I needed two of these, but there is only 1 in the kit. I found it was cheaper to buy one of the shorter length irrigation kits than the individual part I needed.I found the price quite reasonable as well.I've spent more on soaker hoses that only lasted one season than this completely customizable irrigation system. All in all, I highly recommend this kit.

Very easy to set up. Water line looses pressure if you put too many sprayers on a section coming off the main line. I put four lines off the main large one (the max the connector had) and on each of the four lines I put six sprayers … the last two sprayers on each line barley spray any water at all unfortunately.

I have this setup on our new lilac/shrub hedges and it works perfectly for watering everything. I like that I can adjust each nozzle for more or less water (depending on the plant it’s watering), plus setup was super easy and quick. I did spring one leak but realized I hadn’t pushed the hose in far enough. It would be nice if the package came with a shutoff valve but that was easy enough to buy separately!I’ll update in a few months on whether it’s held up or not.

We set this up to water our pots but didn't matter what we did we could not stop it leaking at the main joints so no water got to the pots. The cuts we made were very precise and we followed the instructions to the letter. I do not recommend this product. Total waste of money.