SUNLU PLA Plus 3D Printer Filament, 1.75mm PLA+ 3D Filament for FDM 3D Printer & 3D Pens, Neatly Wound Filament, Strong and Toughness, Dimensional Accuracy +/- 0.02 mm, 1KG Spool(2.2 LBS), Chocolate

So I ordered this to try it out. I have a Flashforge Adventurer 3 and I typically stick to their own brand of PLA, mostly because the built in spool holder only takes 500g spools and because I can be pretty sure their own filament will work well. Boy was I wrong.Before this spool arrived I printed off a couple of Tush rollers to hold the spool externally because as me ruined above, these spools are too big for the Adventurer 3. The spool worked just fine on a pair of Tush rollers. No resistance all good.I then ran a print using an old job stored on the printer. I have a little bunny rabbit print that I use as a benchmark, mostly because my youngest likes to get a new bunny rabbit when Daddy gets some new PLA but also because the model is tough enough to print that it challenges the printer but easy enough that I won't get stuck in an infinite loop of troubleshooting that doesn't matter because I never print anything that is insanely complicated or at the limits of 3D printing. I intentionally spend time making sure anything I print is oriented in a way that makes it easier or I modify it to make it less challenging.Anyway, on to the PLA+...first print was perfect and I didn't have to adjust anything. Print settings were 0.18mm layers, cooling off first layer, 60c bed (glass bed, I have the Pro model) and 220c nozzle. No raft. No brim.I got a clean print, no stringing, perfect adhesion and no warping or layer issues. The final result was a sort of matte finish with a small amount of sheen.I've printed with black PLA before and you typically get that shiny black drainpipe look but with this stuff, it's quite tasteful. It's not as flat as you'd expect though, definitely shiny but not overly shiny. Your prints won't look cheap.The stand out here though is the very low amount of stringing. It's virtually none existent. There is a tiny bit of really fine stringing but it's very easy to deal with after the print. Absolutely nowhere near the amount of stringing I usually see.I think this brand might be my go to from now on. Good stuff.In terms of toughness Vs standard PLA...my lad hasn't snapped the ears off his bunny yet, which he usually manages within a few minutes. So I'm guessing this stuff is a lot tougher than Flashforge PLA.I've since run off some other prints that I know to be quite weak with Flashforge PLA and so far they have proven to be a bit stiffer and less fragile. I'd place this stuff somewhere between standard PLA and ABS.If you're looking at this stuff and you're like me and wondering if straying from your usual stuff is worth it, the answer is probably yes.At this stage I don't know how well the roll will keep, some other rolls from other brands have got brittle on me after a while, which is another reason I typically didn't buy bigger spools.

I normally buy Eryone or Esun PLA+ but thought i would try this has it was on offer. Ive done a few prints at 200c nozzle and 60c bed and i am impressed. It prints nice and smooth and the diameter is consistent. Adhesion is excellent on my textured PEI build plate.The reel is wound nice and tidy (unlike Esun) and it even came with a filament clip.I tried a warping test to see how it copes with extreme overhangs and it was just average (better then the Eryone but not has good has the Esun). I will definitely buy it again in the future. I now have three different brands i can rely on.Recommended

A big fan of SUNLU PLA recently. A nice shade of red. Plastic spool is great so it can be used in my Bambu AMS. Really fed up of the limited choice of manufactures that are still producing plastic spools but thankfully I'm having great success with SUNLU PLA.Prints at high speed, adheres to the bed well and prints in perfect quality. No stringing.Would recommend.

Used on Bambu machines (A1/P1P) - This white is brighter than the eSun equivalent, and for what I use this has less stringing so I prefer it. I have taken a star off because I have to use adaptors with my equipment which can be frustrating, other than that, this is the go to filament for me.

Sunlu PLA+ always does the job well for the stuff that I like to print.Despite running a Bambu Lab X1-Carbon, I'm not someone who obsesses about print settings, or who spends hours playing around with calibration prints to fine tune everything. I really just like to design and print my stuff using the defaults whenever possible.I've used Sunlu filaments frequently since 2018. I've never had a reason to complain. The product has always done the job.It's always well packaged, and the last couple of reels I bought even came with filament clips!So long as they keep up these standards, I'll continue to use their products!

I used with with a Bambu Lab P1S with AMS and the SUNLU PLA+ works perfectly. Just have to set the filament type as Bambu Lab PLA Tough and off you go.It prints really well but couldn’t say if it’s any tougher than normal PLA but will take SUNLU’s word for it.

The quality of this filament is great and the colour is so vibrant! I have had no issues with tangling, clogging or filament breaks when using on both Creality and Anycubic printers, so performance is great

Prints well in my X1C using the generic profile

We are new to the printing world but I’m noticing the PLA will make or break a project. This PLA rendered a clean, bright, vibrant orange print and no stringy mess. No clogging. Just quality prints with my Ender 3 pro.

Buen filamento se imprime facil

Tangled spool, 4 prints failed due to this.Can't recommend this product.

Nic się nie podoba. Kruchy , zacina się. Co do rozmiaru mam wątpliwości czy nie jest więcej niż 1,75. Sprawdziłem jest 1,81.

This PLA+ is by far the nicest and easiest going PLA a have used to date. Temperature range on a FF5Mpro is wide. Anywhere between 215 an 235 degree gives good results. The OctoBenchy was without flaws at 230 degree and 200 mm/s.Already printed a large project and all the parts printed straightforward. Even the tricky objects came out fine.This is my togo brand for the next purchase.