PROZRTED HBS24-12Z Faucet Control Smart Instant Hot Water Recirculating Pump System for Tanked, Tankless Water Heaters Super Energy Saving

En breve lo instalo para usarla. Ya la instale funciona muy bien, lo unico no se como ajustar la temperatura del sensor para incrementar la temperatura del agua. Me gustaria comprar un mando a distacia para la bomba, alguien me puede indicar donde?

First off, I would absolutely recommend this product. It works as advertised, and most importantly, the customer support is exceptional. I did, however, have an issue with this at first, which as a result, caused me to give this positive review. Read on...I first installed the pump with all the original provided parts. Pretty straight forward. I did have to purchase longer water hoses, as the ones included were not long enough, in my case, (only 1 foot).The brass Ts that were included with the pump, (see photo), leaked out the base of the screw-on nut. Used Teflon plumber’s tape and the provided washers. No matter what I did, I could not get them to seal. I wound up having to purchase different style Ts/nipples, locally. Once installed, no more leaking, (see photo).I notified the seller, and voluntarily provided receipts and a photo. They were apologetic, and immediately reimbursed me for the additional parts with absolutely no argument.In closing, the pump works great! It's quiet. Hot water in seconds now, rather than 2 to 3 minutes, as before. Most of all, this company was exceptional to deal with and I would recommend them to others. **************************************************************Regarding the optional remote:I like the optional remote control for the pump. Of the 3 modes, " SMART MODE" (orange), "ENERGY SAVING" (green), and "MANUAL" (no light at all), I actually like "MANUAL" the best. Here's why:It seems with other 2 choices, because the water temp is maxed out automatically by the pump at 42 degrees C, (107.6 F), when it is on “SMART MODE”, or “ENERGY SAVING”, it's never gets quite as hot as I'd like it to. The warm water is right at the faucet, and on-demand, but the hot temp is limited, by design.When the pump is set to "MANUAL", it delivers the water at a hotter temp (the max temp setting on my water heater is hotter). I keep the remote on the wall by the sink, and just press it when I want hot water. It delivers within 20-30 seconds, and definitely hotter than I'd felt on the other settings.I wish I had bought this 20+ years ago. I can't imagine how many gallons of water I've wasted/paid for over the years waiting for it to warm up! Great product. Great company!

I only wish that two remote controls would work with this unit. It only allows pairing of one. Very quiet. I've had it for 1.5 years now, running like new.

Es un aparato casi perfecto que ahorra mucha agua y proporciona agua caliente al instante en el fregadero y la ducha. Tras probarlo en modo automático y eco, decidí que funcionaba con demasiada frecuencia cuando no era necesario, desperdiciando gas en el calentador. Ahora lo uso en modo manual con el control remoto. Sólo desearía que hubiera una forma de desactivar el ciclo de una hora que inicia el control.Unas dos veces al año se atasca la válvula antiretorno, a pesar de que tengo un buen filtro en el suministro de agua de la casa y la rejilla de entrada en la bomba. El problema es fácil de diagnosticar y de reparar.Síntomas: Agua caliente en el grifo sólo templada, agua fría en el grifo nunca fría del todo.Diagnóstico: Cierra la válvula de suministro de agua caliente debajo del fregadero, abre el grifo a máxima temperatura. No debería salir agua del grifo. Si sale, significa que la válvula de retención no se cierra y el agua fría retroalimenta el suministro de agua caliente a través de la bomba.Quítala: Cierra las dos válvulas de suministro bajo el fregadero, desconecta el cable de alimentación de la bomba, retira los conectores en T donde se unen a la bomba. Retira la bomba de la pared.Prueba: Sopla por la boca en el conector de salida. Debe estar sellado y no pasar aire. Si pasa aire, la válvula de retención no está bien asentada. Sopla con la boca en la entrada de agua caliente. Debe haber una resistencia inicial, luego pasa el aire cuando el resorte de la válvula de retención permite que se abra.El vástago central de la válvula (cruz interna) sobresale 0,4 mm (0,015 pulgadas) de la carcasa de plástico blanco que la rodea cuando está asentada. La carcasa encaja a presión y no se puede desmontar.Reparación: Utilicé unas pinzas para sacar un poco el pasador central, y luego hice correr agua de otro grifo por el conector de salida para eliminar la suciedad. El agua pasa por la bomba y sale por la entrada de agua caliente. Retira las pinzas y comprueba si el pasador se retrae y asienta correctamente. Repite la prueba de soplado de aire.Montaje de nuevo: Justo al revés. Aprieta los conectores en T con la mano y luego ¼ de vuelta con la llave. No los aprietes demasiado o tendrán fugas.

I have had “under the sink” water circulation pumps for over 10 years. I need two pumps because of the layout of the water lines. The master bath is in one end of the house, the kitchen in the other end, and the water heater in the middle. The previous pumps failed several times over the years (only a 30 day return policy) and were replaced to the tune of $250 each time. During the past year a new model pump from the same company (9 months in use) was erratic and became extremely noisy reaching 110 decibels. An inquiry to the company prompted a rather snarky reply saying only that “some bearings are noisier than others.” Really? Interestingly, their website has no link for posting a review. Too bad…I’d have one for them.My new PROZRTED pumps are excellent, and the noise level is read as 44 decibels.I bought one and was so impressed that I bought the second one. Both are working perfectly.I calculated that I am saving over 12,000 gallons per year.