ZINUS Judy Upholstered Platform Bed Frame Mattress Foundation, Wood Slat Support, No Box Spring Needed. Easy Assembly, King, Grey

The Zinus Judy Upholstered Bed Frame is an excellent addition to any bedroom. Assembling it was a breeze; all parts were well-labeled, and the instructions were clear and easy to follow. It took me less than an hour to put it together on my own.The quality of this bed frame is impressive. The materials feel sturdy and durable, providing solid support for the mattress without any creaking or wobbling. The upholstered headboard adds a touch of elegance and comfort, making it a cozy spot to lean against while reading or watching TV.One of the standout features is that there was no chemical odor, often a concern with new furniture. This was a relief and made the bed usable immediately after assembly.Considering the quality and ease of assembly, the price point is very reasonable. It offers great value without compromising on sturdiness or aesthetics. If you're looking for a stylish, robust, and affordable bed frame, the Zinus Judy Upholstered Bed Frame is a fantastic choice.

I'm pretty impressed with this product over all, it does the job of holding a mattress perfectly well, it's pretty solid, and it looks pretty nice. It isn't mind blowing high quality, but it is pretty much everything I expected from a $250 piece of furniture.Here is what to expect when you purchase this product (and if you like the way it looks, I say go for it):It comes in a enormous box (which UPS decided to leave in my back yard next to my trash cans). Inside, the headboard is wrapped in a big plastic bag. All of the parts, including the directions and hardware, are packed inside the headboard in the zipper compartment. If you don't have a very big space to work in, I recommend doing what I did - cut open the box outside, (it's actually double-boxed) taking care not to cut too deeply, and remove the headboard. Carry that inside to wherever you are going to set it up. Leave the box outside, it's huge and serves no purpose going forward.Warning: it's very heavy. This is a two person lift for sure, though if you had to you could remove the parts from inside and carry them in multiple trips (the empty headboard is bulky but not too heavy).Make sure you have a large enough space to assemble before you start unpacking, you will need to stack the parts out of the way so you can position the frame.Assembly is really strait forward, there is a small hardware kit with five screws, a set of spare parts, a hex wrench, and a hex ratchet (which is a life saver, tightening screws with a ratchet is so very much easier than a normal hex wrench). There is a single (two sided) large page of instructions. There isn't much text, but you don't really need it, the pictures are all you need. All the other screws needed are already threaded into holes on all the parts - you never need to remove those screws either, just loosen them so that the parts slide together, then tighten them down. The five screws in the part kit are for the frame.You will find two large metal pieces, they are the two parts of the frame. They come folded up, all you have to do is unfold them and their legs, and place the shorter one across the center of the longer one (there is a slot for this) creating an elongated plus sign shape. The longer part of the frame runs along the center of the bed length-wise. The five screws are inserted into holes on the top of the frame above the legs, one screw on each arm of the frame, and one in the center where they cross. Those screws main purpose is to prevent the frame from folding. The frame pieces themselves are very solid, and don't require any additional assembly.There is a box containing the for wooden legs, they have screws sticking out the top that thread into the bottom of the baseboard and headboard. Once those are attached, you need to loosen all the screws all all the remaining parts - the headboard, foot board, and four side panels. Back them out a quarter to half an inch. Then you position the head and foot boards, and slide the ends of the long portion of frame over the screws in the middle of those parts. At this point you can tighten those screws a bit, not actually tight, but enough to keep anything from shifting around. Then you slide all the side pieces on and finally tighten everything down. This is where that ratchet comes into play, it makes getting everything snug so much easier than it would be without it.The cross slats are all attached together in rolls, you just stick the first one to the Velcro, and pull each one tight and the Velcro strips space them perfectly.Toss your mattress on top, and you're done. I should note that the edges of the bed don't extend up past the slats, so the mattress isn't down in the box at all. I kinda prefer beds where it is, so it's prevented from sliding, but it isn't a big deal.Everything feels nice and solid, no creaking or wobbling or anything. I'm pretty happy so far, the only real gripes are that the padding on the headboard isn't especially thick - but it's enough to be more comfortable than wood, or a wall - and the fabric isn't especially soft. I'm also not a fan of the brown stained wood legs, I would have preferred them be painted black I think it would have fit better.Bottom line, I like it. If you're looking for a platform bed in this price range and like the look of this one, I recommend it.Edit: 4 Years laterI still really like it. It's solid, I haven't ever needed to tighten anything, and there are still no creaking noises or anything. In the time I've had it, I switched from a traditional spring mattress to a foam one - no problem, this frame supports it just great.My only complaint at all, is that the mattress can slide a little if you move a lot in your sleep. It's not a big problem, we're talking an inch or so in a week, and you can shift it back no problem. But if the sides just extended up an inch past the slats to prevent the mattress from being able to move at all, it would be the perfect bed.

It was delivered quickly. The packaging was great and had everything I needed. The directions were easy to follow, and the assembly was easy. It is very sturdy and nice looking.

Easy installation. Good quality and is pleasing to the eye. I’ve been using for a couple of weeks now and I have no complaints. It’s lower to the floor than I thought it would be, however, the measurements were given. I didn’t pay attention to them so that’s my fault. Very happy with my purchase!

Arrived in 2 days, perfectly packaged and easy to install. This bed screams sturdy, modern, good quality and at a perfect price point!Note - I compared the bed to the same one I had purchased in Sept 2022 and this bed seemed shorter. Low and behold it was! It is described as 43 inches however the one I purchased in only 40 inches. Hence the removal of a star on my rating.

Your average bed frame that does it's job.The assembly was easy to follow, it's just that some of the screws were hard to screw take out and screw on so beware of that, you may need some patience since it's pretty tedious work. Overall assembly took me an hour.Good color the material seems average and look wise is alright.In terms of sturdiness it does move pretty easily, doesn't take much force at all to move it around, so if you move around on your bed it may or may not move depending on how big you are.With that said, I'm going to rate it a 5 because it's what I was looking for at this price range. Not high end, but very good quality. I would say buy it if you are looking for using it for 2-3 years.

I've ordered a few different pieces of cheapo furniture off Amazon in the past and it's always a bit of a risk doing it without seeing it first. This platform bedframe genuinely surprised me though.It was very well packaged and came in perfect condition. I got the queen size, and the box is pretty heavy. You can absolutely build it by yourself, but moving it would be easier with some help.Everything was packaged neatly and securely inside the headboard. Full assembly was remarkably simple, taking a little over half an hour on my own. Should be fairly easy to disassemble and reassemble as well, which is useful if you move a lot. I used the supplied allen key to connect everything keeping it somewhat loose until everything was connected, and then used the supplied ratcheting wrench (very useful, I wish all prefabricated furniture came with one) to tighten everything up.It feels VERY solid, no loose wiggles or squeaks anywhere. I was worried the headboard would say if you rested your back against it since it's mostly hollow, and am happy to report that it offers plenty of support, no issues there.Only bit of confusion was not realizing that several of the screws are already screwed into the headboard, sideboards and footboard. You just need to loosen them to allow the frame to hook around them and then tighten them back up. Initially I thought that I was missing a pack of screws, but had I taken the sideboards out of the packaging and inspected them I would have noiced. The supplied paper instructions are a little vague, but honestly assembly is simple enough that they get the job done. There is a QR Code to scan with your phone if you would prefer watching video instructions instead.All in all, easily 5 stars. It feels very solid, no squeaks or rattles, came in perfect condition, and after putting it together in just over half an hour by myself, I'm confident in that I could do it again in half the time, no instructions needed. Very simple and sturdy.

So simple to put together even a husband and wife can do it (and still remain the married)🤣. It looks fab. Very sturdy and great value for money. If I needed another would definitely buy it. And the “secret pouch” at the back makes a handy storage area!

The bed is like the photo and it is very beautiful and the quality is excellent

This bed was well packaged with all the hardware zipped into the back of the headboard. It was really easy to assemble and is very sturdy. We are so pleased with the quality and the style. The grey is nice and dark and the pattern is subtle but contemporary.One issue is that the mattress and frame are both Zinus, but the mattress hangs off the edge by at least an inch. This really shouldn’t happen when you are buying a standard “full” mattress and a standard “full” frame made by the same company.As well, the memory foam mattress is an adjustment compared to spring mattresses...quite hard and likely harder with this kind of frame underneath. We are buying a pillowtop to soften it up a bit.

Overall: this bedframe was easy to assemble all packaging was perfectly fitted inside the back of the head rest, came with a pretty easy to use tool for tightening the pieces. Only caveat is if you want to carry it, does require 2 people at least, I had to carry everything by pieces.Assembly: assembly was perfect, easy, instructions were clear, and came with all required tools.Color/Quality: the material seems good craftmanship, no complaints as of now, it seems sturdy and every piece has its well identified place, properly identified in the instructions.Used it with a Zinus mattress works perfectly, the mattress could have been more comfortable but that is for another review!