Compatible with Kawasaki Z900 Z900RS 2017-2023 Motorcycle Frame Anti-Collision Falling Protection Slider Crash z900 z 900rs Accessories (Black)

These sliders were easy to install on my Z900. Do one side at a time as another reviewer described. First you'll have to remove the factory bolt. Then slide all of the pieces onto the bolt provided with the kit. Put some threadlocker on the bolt and use a 8mm hex-head wrench to thread the new bolt and assembly into its hole. I did not have to lift the engine with a jack to make the holes align, fortunately.The cap that covers the hex-head bolt is threaded. Remove it with some thumb pressure or grab the edges with your fingernails. Add a drop of threadlocker before installing it after the sliders are installed. Tightening the cap is difficult; I used a needlenose pliers to grab the edges of the cap and twist it in slowly. The pliers slipped a few times and scratched the cap; go slow if you use this method.

The Radiator on the 2023 Z900 RS Cafe sticks out pretty far so that’s why I wanted these in the first place. The install wasn’t too bad, but you have to keep in mind that these will replace your stock motor mount bolts so when you take them out make sure you replace them one at a time and wait until both are in to fully tighten to keep everything in alignment otherwise you’ll have a hard time getting the new bolts in. To get the second bolt in I actually had to put a jackstand under the motor and pull on the handle bars toward me to get the threads to line up properly so a second set of hands could be helpful.So as for saving the radiator… my genius self was wearing sandals while moving my bike around in the garage and one of them slipped off causing me to drop the bike, the slider and my mirror got a little scratch but the radiator did not. Definitely recommend if you have this bike.

Installers had to inform me they were NOT for a 2018 z900rs, as ld ordered for..........

Good looking, quality sliders, hopefully will never get to used them 🤞

Recomiendo 200%

If I am mistaken send picture of item in a Z900RS please…

They are pretty solid they come with everything u need to put them one I have a 2023 z900 abs and the bolts fit right on yes they are full metal

Easy to install beware the cap at the top is twist off to reveal the hole where the bolt goes.