FIDUCIAL HOME9 Tiers Tall Narrow Shoe Storage Cabinet for Entryway 18 Pairs High Top Shoe Cubby Container Bin with Clear Lid,Fit Size 12

Everything in the package was prepared with rubber bands to separate the tubes but the connectors and door hinges were haphazardly thrown in a bag that doesn’t close so some of them were floating around in the box when I opened it. None were lost though!It took me, by myself, close to an hour to put together (no rushing). There was no tools included or needed for assembling this product - just your own strength... which trying to get the shelf fabric on to the last post is … Fun!I started putting together 1 at a time. Then decided that wasn’t efficient so I completed Step 1 on all the remaining Part B tubes with their Part E connectors. Once I had all them done I then did Steps 2 and 3 on half the connectors followed by Step 4 which completes the ‘shelf’ on each one. Then I put Part C in all the tops of the ‘shelves’ I just created. Be sure to push down hard and make the seal is really tight, this is more than just about sturdiness, as if they aren’t seated all the way when you put on the draping fabric it won’t fit right and you can’t clip it.Next I put each shelf with protruding upward legs on top of each other finishing with a shelf that doesn’t have them. Next I draped the fabric over and clipped it in place. I put part F clips in where they go and then followed with Part H - the lids, and this is where you will have the most trouble if you didn’t push in the tubes all the way. Be sure to remove the film. I toyed with the idea of leaving some film on to give it that look but then peeled off the film while it was already installed (so it’s possible to do that step last without hurting anything).This is taller than me, which isn’t hard to do, so make sure you have enough room for 73 3/8 “ tall by 17 3/4” wide by 13 1/4" deep.I was able to fit 3 pairs of my female size 7-8 shoes (stacked) on a shelf. Husband’s clown shoes, 12-13 fit 2 on a shelf (yes it fit a 13, both the shoes in the image are sized mens 13).Great product, I might get another to sit beside this to hold clothes such as husband’s work clothes and night clothes etc. Although husband might take some shelves for hunting gear storage.The biggest flaw might be the ‘lids’ which are plastic pieces that I don’t know how long they will last with frequent open and closing. But, the good thing is that you can utilize this product without the lid’s and it will work just fine.

So I like this shelf but there are a couple of drawbacks. It takes forever and the connector pieces break easily during assembly. And the cover really doesn't hold tight to the frame so dust and whatever is still getting in there. But that being said I like the size and that it can hold taller heals and my high tops.

This product was easy to build and without any shoes on the device it looked sturdy. I was wrong ! After 2 weeks of having shoes on the rack it began to tilt and would not keep its form. Racks began popping out and when i went to take all of the shoes off, the racks weren’t keeping their sturdy shape. I had to take off half the racks in order for the item to stay sturdy. I am 5’3 and the rack was about 6 feet tall. By the time I had to take all of the racks off the remaining piece is now chest high on me. I do not recommend this item.

I honestly thought my wife had a TON of shoes.. That was until I got this to help wrangle her shoes. Currently there are 19 pairs of shoes in it (and one pair on it) and like 7 without mates.. who knew :). When I seen this I was like Honey you need this .. She was like Naaa then it showed up in our room and she was like WOW. So nearly all of her shoes are in here. And wow it does hold a lot. and still space for 2 more pairs at the top. Now she does have a few boxes in the garage still with Shoes in them (so a second one may be coming home:). ) Construction is interesting and a bit of a learning experience. It does take some had strength or a rubber mallet to assemble. I made sure the rough edge of the shelf was at the bottom and the smooth surface was at top. Also the 4 way connectors make sure you have them facing the right way or you will be redoing shelfs (yea you would think I would learn this on the first one ... Yea right hehe) its best to assemble one end with the 2 long rods and place she shelf material on those 2 rods. Then build the side part with the 2 4 way connectors then push them on the already assembled shelf. I tried it to where I put the 4 ways on the other 3 parts (the 2 long Rod and one medium Rod) and it took some hand strength to try to make the rod fit into the 4 way. Mainly due to the shelf material not wanting to stretch. So if you start by making the first section with the medium length rod and the 2 long rods with the 4 ways. Then assemble the medium rod and the last 2 4 ways then slide them together its WAY easier. I like being symmetrical when Im building stuff like this and the right side of the cover went on nice and smooth yet the left side.. I could never get it smooth. But no one is going to look at it and make a fuss. (ok there are some out there that will do that but it's for Shoe storage. As I built this I went one shelf at a time and assembled it as I went. And wow it's tall. Im 5'9" tall and it is over my head, it is also very light which is crazy, but it was not heavy in the first place. The thin covers are really not mandatory. And I have a feeling they may be removed in the future just because they are flimsy. But for now they work fine. AND WOW they were covered in plastic. Lots of plastic covered these clear covers. All in all it's a great storage system for shoes. And even through its not a very durable material they are made of, If taken care of and not roughed up , it should last a very long time.Pros: LOTS of storage for shoes.Light and easy to transportCons: Needs hand strength to assemble

I ordered this because the amount of shoes around my apartment was getting out of hand. It came quickly and it was super easy to assemble.

Be sure to count your parts twice before putting it together. also it is very difficult to assembly. Wouldn’t recommend this.