FOSROC HYDROPROOF 1L

Description

Hydroproof is a single component acrylic polymer for cement based waterproof composite coating membrane. Description- Hydroproof is formulated to be mixed with cement on site or simply brush applied over concrete or masonry surfaces to provide an effective waterproof membrane. Uses- Provides an effective and economical method of waterproofing to concrete and masonry surfaces, by mixing with cement and application by brush. Advantages- 1. Non - toxic, non-flammable and user friendly Provides a tough, impermeable waterproof membrane 2. Can be applied by brush, on horizontal and vertical surfaces 3. Excellent adhesion to concrete and masonry surfaces 4. Protects concrete and mortar from natural elements such as wind, rain, sunlight 5. Breathable - allows inside water vapour to escape Application- For best results, wet the surface before coating. Apply the mix with a short, stiff bristle brush like a paint to an approximate thickness of 1 to 2mm. During the first 12 hours of curing, Hydroproof surface must be protected from abrasion, rain or other adverse conditions. No traffic shall be allowed within 48 hours after application. Normally 2 coats of application of Hydroproof are recommended. First coat should be allowed to air dry for 5 - 6 hours. After application of the final coat, initial air drying shall be allowed for 2 to 6 hours. During this period water should not be used for curing. Moist curing should be done for the next 24 hours by spraying water on Hydroproof coating. Following moist curing, Hydroproof should be allowed to dry for three days before subjecting it to submersion in water. Storage- Hydroproof liquid has a shelf life of 12 months,when stored in unopened containers under normal warehouse conditions.