GAMDIASTALOS PC Case, EATX Gaming Mid Tower, Pre-install 3 PWM ARGB Fan, Tempered Glass Side Panel, Airflow Mesh, Support Dual 360 & Type-C, White

I picked this case up for a little over £40 as I was wanting to move my Dell Optiplex system into a standard ATX case. Having changed to a more suitable motherboard I set about trying to find a cheap and cheerful case with decent airflow.Having not ever built a PC before I didn’t want to spend a fortune or want anything too fancy.This case in my opinion looks great, it’s sleek and modern and has tons of airflow. I actually like the smoked glass, although it does mute the colours of any RGB you have.There’s plenty room for all your components and I was able to cable manage as neatly as my ability enabled. The 3 included fans plugged into a Sata cable from my PSU and work brilliantly, you’re able to cycle colours using a button next to the power on button, which are connected to the motherboard. Note that these do not change speed like a CPU fan and would have to be connected as such to the motherboard if you wanted that option.Anyway, for the price you really can’t knock it, I’m very pleased with it and how my budget build has turned out. Definitely worth a buy if you’re starting out and want a case that gives you decent options and is of decent enough quality.

Good value for money, chic appearance and very good size. Happy with the purchase

Overall, for the price, I am fairly satisfied with this case. It does, however, have some pretty big design flaws.The metal is thin and flimsy , as expected, and yet the build quality overall it pretty good, the tempered glass is tinted and very thick, there is rubber gromets to hold the side glass panel while screwing it in. It comes with very good front IO, the cables for it are very well laid out and of good quality.The fans provided, are sata powered only. This means that they run at full speed, always. Luckily, they are fairly quiet, so not the biggest issue, but it also means that they will likely not have a very long life and you may have bearing issues within a couple years.The LEDs on them aren't the brightest either, but are very uniform. I have not found any connector in order to connect them to my 5v rgb socket on my motherboard, but I wasn't all too interested in that to be perfectly honest, and I liked the simplicity of being able to change colour with the led button on the front. Overall, considering the price point of this case, they get a pass, not bad, but not amazing.Building in this case was very easy and straight forward, with the exception of one design flaw. There is a decent gap between the top of the case and the top of the motherboard, making it very easy to screw in the top motherboard screws, and to insert the CPU power cable. There is also ample pass through holes for the USB2.0, HD audio, and jumper cables, and 2 at the top for CPU cables. They even added a very large opening to let the 8 pin cable for the GPU to pass from underneath rather than through the side of the motherboard.Unfortunately though, there is only one side hole for the 24 pin, usb 3.0 and sata cables. And that hole, is in the middle of the case. This may be an issue depending on the design of your motherboard, and how many SATA devices you have plugged in. For me however, as I only use a m.2 ssd, this was not an issue, and the 24 pin connector on my motherboard just happened to be right next to the hole, lucky. I can see this being a major issue for some people though, especially for people who like to use cable extensions, which tend to be much thicker.They also did not provide any tool to install the motherboard stands. This should be included with all PC cases.I very much doubt anyone would be able to fit a top mounted radiator, unless they have absolutely tiny RAM sticks. Although better than some, the gap between the top of the case and the top of the motherboard isn't massive. Good enough to route cables and screw the motherboard in, but I am doubtful that a radiator and fans would fit and clear the RAM. Please make sure you buy low profile ram if you intend on installing a top mounted radiator, and get a slim radiator. My PC is air cooled, so not an issue for me, but please bear that in mind.The overall aesthetic of the case is good. The glass windows are very heavily tinted, which I personally like, I personally do not enjoy seeing the components inside the pc, but do enjoy the LED lights. You can still make out the outline of the components inside, but the tint is quite strong so you would not be able to see the cables or anything like that.The case comes with a dust filter underneath the PSU shroud, and on top of the case.My biggest issue with this case , however, is the front air intakes. There is zero, and I mean , zero, dust prevention there. No mesh, no filters, nothing. just a gaping hole, leading straight onto the fans. I can already see that this case will get VERY dusty, and the front glass will quickly get coated with dust. I have an electric duster, so it's not the end of the world, but having to dust your PC every month, rather than say every 4-6 months, is going to be very annoying. If the manufacturer reads this, please please add a mesh filter on the front, just to cover those 2 holes that lets the air into the case.if they added an extra hole on the side of the motherboard, and added a filter to the front , this case would be absolutely great. As it is though, with the lack of dust prevention, and no pass through holes for sata cables, It gets a 4/5 rating from me.

Excellent box, well thought through and designed. Worked perfectly with our new build

The case is simply terrible. It arrived bent. The lid was bent and the bottom too.Moreover, the bottom was so bent that the power supply simply did not fit there. Thank God, the materials are so cheap that I was able to bend the bottom by hand.This case itself is incredibly stupid to assemble. A bunch of wires that 1. you don’t need, 2. are located so that you will go crazy while you figure out how to connect them. Now comes the fun part. In the photo I show the magnificence of Gamdias designers. This is the gap between the body and the front glass (on both sides) the width of a finger. What does this mean for us? All the dust will fall through these two excellent holes directly onto all your elements - motherboard, gpu. You will never be able to clean the front glass itself. Cool? Cool. Two beautiful RGB fans and in front of them the glass is covered with dust - and nothing prevents this dust from getting there. The intention of the creators of this squalor, the reasons for such decisions, will be a mystery until the end of my days.

Although an ATX motherboard fits in this case, you might consider the size of the other components such as RAM, the processor cooler and the graphics card. It was almost a puzzle for me to accommodate the whole thing. Despite the cooler don't have speed control this case is way better in quality when compared with others with the same price such as MSI ones

This case is value for money, it took a full atx motherboard and graphics card, the cable management is ⭐⭐⭐⭐⭐Plenty of room inside the fans work and are very colourful but no regulator to control them 😕 I also put the computer on a wheeled dolly (useful) to make it easier to move when cleaning around home very impressed with the case

Small, clean and pretty easy to build in. Lacks a few nice features that you might find on cases but more expensive from branda like MSI or nzxt but still well worth the price. Arrived in damaged packed with styrofoam.Comes with some argb fans . Decent for pre installed fans.Airflow is good plenty of options for fan layoutsCable management is ok but don't expect to have a lot of space at the back to hide the cablesThe performance day to day is good. Leaves plenty of space on a desk due to it's small footprint. Has a glass side panel and magnetic mesh covers for the top vents.

I recently upgraded my PC build and chose the GAMDIAS White RGB Gaming ATX Mid Tower Case, and I couldn't be happier with my decision! This case not only looks fantastic with its sleek white design and tempered glass panel, but it also offers incredible functionality.One of the standout features is the three built-in 120mm ARGB fans, which provide excellent airflow while adding a vibrant touch of color to my setup. The RGB lighting is mesmerizing, and it's super easy to synchronize with my motherboard for a cohesive look.The installation process was a breeze. The case is designed with ample space, allowing for easy cable management. The PSU shroud effectively hides any unsightly cables, giving my build a clean and organized appearance. Plus, the airflow front panel ensures that my components stay cool during gaming sessions.Another bonus is the magnetic dust filter, which keeps the interior clean without much effort on my part. Overall, the GAMDIAS White RGB Gaming ATX Case has exceeded my expectations. If you're looking for an aesthetically pleasing and easy-to-use case, I highly recommend this one!

Wasn’t sure what the expect for the price and the brand, but I love this case. Colors are great, very solid, magnetic screws for tempered glass side panel easy to remove and reinstall. Tinted glass is a bit too dark but if that’s the only complaint, my life is too easy.

The media could not be loaded. Great case. Has plenty of space for an atx board and a 240 aio cooler. Love the RGB fans. Plenty cool for my new system. AM5 ryzen 7 7700xt. Good quality for the price. I might get another one. Nice case.

TL;DR, this case is a fantastic value for for $60. If you're building a budget system or need a cheap case to house some spare parts, I can 100% recommend this case.Pros:- Full size ATX motherboard support is huge for this price. Also has no issues fitting mid-sized GPUs.- The 3 included fans move plenty of air and are relativity quiet. The RGB lights get bright and look really good.- This case's design makes it look as good as cases that cost twice as much.Cons:- The case is very lightweight, but in a cheap feeling way. The case feels like it's made of really thin metal, but feels sturdy enough protect the system. Maybe don't put anything to heavy on top of the case.- The fans are also not PWM, they are powered by a SATA connector so they always run at full speed. Also the RGB is controlled by a button on the case and doesn't connect to the motherboard so RGB control is a little bit limited.- There isn't a ton of space for cable management, and with a full sized ATX motherboard, you end up covering up a few of the cable management holes.- The case is also rather compact, be sure to check GPU clearance. Mid-spec GPUs will fit just fine in this case but some of the longer 3 fan designs may have length issues.- The front fans have no dust filter, but there is a magnetic dust filter for the top fan slots.Overall, you can tell where the corners were cut to save on manufacturing costs, but those cost saving measures were planned really well. This case doesn't meet the quality or features of something like an NZXT H5 Flow, but it sure looks and cools just as good as one.

I have put together numerous computers - at least 20 - in the past. I needed an inexpensive case to put together a computer composed of spare parts that ended up being left over from another computer upgrade.The Gamdias case was able to fulfill the job perfectly. Yes, the metal is thin and you can bend it with your hands if you really tried. However, all the screw holes lined up well, and the layout and design of the case is very very simple, with virtually zero wasted space.I like how the power supply cables are all hidden by a shroud. The white color aesthetic is beautiful. The USB ports on the top of the case work great at USB 3, plugged in correctly to the motherboard. Even the toggle button to cycle through the different LED color options of the case fans works as advertised.I encountered zero problems with this case, and ended up with a result that far exceeded my expectation for an inexpensive case. The smoked glass and LED lighting gives this computer a whole new life. Wonderful little case!