PRE-APPLICATION INSTRUCTIONS If possible bring your vehicle into a building. If it’s cold outside then a warm building will help adhesion of the material to the surface of the window. Keeping material out of direct sunlight during hot temperatures will also help you during the installation process. Clean surface thoroughly with soap and water or appropriate window cleaner. If you use any heavy duty cleaners to remove adhesive or tar then make sure you remove all residue left behind from the cleaners. Denatured alcohol is a good cleaner for removing any last bits of this type of residue. APPLICATION INSTRUCTIONS 1. Using masking tape, pre-position your new Creative Tint’s graphic into desired position. 2. Secure the image by taping one edge of your image and removing the positioning tape. 3. Carefully peel off backing from the back of your new graphic. 4. Apply the graphic from the edge you just taped and work to the opposite side, smoothing out the image as you go to prevent bubbles and wrinkles. 5. Trim the excess away from the edges of the window. 6. Burnish the edges of your graphic to ensure there are no loose edges.
Trustpilot
1 week ago
1 day ago
