Kwikee Kwiver - Kwik 3 SS - 3 Arrow Bow Quiver for Archery and Hunting - Quick Detach, Lightweight, Quiet Shooting

In March of this year I purchased two Kwikee Kwiver "3" arrow quivers for two recurve bows that I own. One is a 35# bow and the other is a 55# bow. I installed one of the quivers on the #35 bow to start practicing and to get into shape to potentially elk hunt with the 55# bow. The quiver seemed to work very well.Several weeks ago I installed the other quiver onto the #55 bow to begin the process of adjusting to shooting the heavier bow. This past weekend I was shooting the #55 bow in my backyard and all of sudden the quiver fell out of its mount on the bow and damaged the nocks on all three arrows. At first I was confused as to what had happened. Upon inspection, I discovered that the tapered insert on the quiver had cracked in half. Please see the attached photos. I was shocked as I have used Kwikee Quivers on several compound bows and never had any problems. Curious, I checked the quiver on my #35 target recurve and found that it too was cracked but had not yet fallen out of the mount on the bow. Again see the attached pictures.I must admit that I am very disappointed in the failure of each quiver. Fortunately, I wasn't on a long hunting trip in the mountains, otherwise carrying my arrows would have been a challenge to say the least. Also, I am very careful with all my hunting gear and I am certain that the quivers were not damaged by me during use.I have tried to contact Kwikee Kwiver about this issue several times via email and their on-line chat and I have not received a single response. So much for a lifetime guarantee on their products.Bottom line, do not spend your money on these quivers, you will likely be very disappointed....find something higher quality and reliable.

I got this quiver after the end of last season to replace a bigger one for 6 arrows, so I obviously have no experience with it actually going after deer yet. That being said, I am quite happy with the purchase so far.Pros:- Small and light. If you need more than 3 arrows hunting for whitetail you should probably spend some additional time on the range.- Seems to be solid quality. Still have to see how the finish holds up once I drag it through brush next season though.Cons:- The holding bracket at the bow is so wide that it covers the screws holding my sight. I had it in the past that the bolts came slightly loose and the sight had some play. Should this happen again I will first have to remove the quiver bracket before I can re-tighten the sight bolts.- The bottom holder is a little tight on my arrows (Beman ICS hunter), so it's harder to get the arrows out than I would like. I believe that this problem will solve itself over time though.Neutral:- if you use fixed broadheads (like myself) it will be a tight fit into the bucket and you will have to rotate the arrows to make the heads fit. This will not be an issue with mechanicals.All taken together I believe this is a good product for a fair price.

Have used one of these for at least 5 years and recently purchased another for a new bow. These little quivers are solid, silent, and very light weight. There is not a lot of room in the hood so fixed blade broadheads can't be overly wide and must be carefully arranged. These quivers hold arrows with two rubber grippers vs. one on the Quikee 6 = very snug but deploying an arrow can be slower than from a Quikee 6.

I was skeptical about this quiver but it has quality construction. I purchased this to carry three heavy Fin Finder fishing arrows on my Samick Sage recurve bow. I can strategically place the barbed heads in the hood with no problems and the double grip arrow holders hold the arrows snug. there is no foam in the hood as there is no need for it with the double grip construction. the quick release lets me remove the quiver and store the arrows in the boat while I am shooting at fish. overall the price and quality makes this a good buy for me.

This is the best quiver I have ever seen or used. I purchased it for my wife's bow and will most likely get one for mine. It's super compact and light. It's surprisingly small. I don't expect her to shoot with it on the bow but I had her practice with two arrows in it just to see what the deviation would be on the target and there was none that I could notice. I would totally recommend this quiver to anyone.Also, I purchased the extra rubber pieces to accommodate the smaller diameter arrows like the easton full metal jacket, or FMJ series, but I will not need them since the standard ones it comes with hold the fmj arrows super tightly. In fact they are almost too tight of a grip on standard diameter arrows.

Got what ordered. Just one small problem. The screw that secures the quiver to the bow is missing. Its part of the Ultra Lock system and Kwikee doesn't sell those separately. I don't wanna return the whole thing over one screw. But I also don't want noise from bow giving me away in the blind or stand either! I guess a call to customer service is in order! LOL

Solid quiver. I don’t like the shiny black plastic look but it’s durable and light weight. Kinda bland but it’s 5 stars cause it’s exactly what you’d expect from looking at the pic. The mount is a lot sturdier than expected. Great price. I have G5 Montec fixed blades and they fit good. A little right but not too tight. I wouldn’t be worried about my arrows falling out during a stalk due to the tight hold.

I was so excited to get this item for my crossbow, until I saw the size of the tip cup...it is tiny!I could only fit two broad heads in it...and they weren't very comfortable in it.The discharge bolt I have wouldn't even fit because this cup is so small!Had to return it...

fits my samick redfox

This quiver has a quick release mount bracket that allows for easy removal, should your carrying case be too shallow. Once the mounting bracket is installed, the quiver slides into the bracket by a dove-tail and is held by two devices: 1. a red thumb lever that locks the dove-tail in place, and 2. a thumb screw that threads through the quiver and presses into the mount itself. Slick system.The arrowhead hood in the quiver I received isn't filled with foam for broad heads to chew up. That said, there's room to put some if your broad heads rattle (mine don't).Mounting the quiver to my compound bow sight was a simple task. Two screws which I greased with  Bohning Tex-Tite Bow String Wax  went in without incident. Done.My low rating isn't for the product, but because it arrived damaged. When I opened the box, the quiver was laying on the bottom of the box, and packing laying on top. Not a big deal at first blush.When I slid the quiver into the mount, I noticed some flex in the spine well above the dove tail. There was a crack right behind the center arrow holder (photos 2&3). This plastic is tough, and the shipping box so I reckon the product was cracked before it went into the shipping box. Being rather impulsive, I threw the quiver away in disgust, not thinking Amazon would want the broken quiver back. Yup my bad.Buy one!. Inspect your quiver! Keep your cool, and learn from my poor example. Bohning Tex-Tite Bow String Wax

I like it... but it’s a little to small. Shooting exodus 125gr broadheads. Don’t like the fact that my broadhead blades come in contact with each other.

Light weight and holds arrows very tight. I really like the attachment bracket, very easy to come off and on

Perfect fit, does what is supposed to and is much quieter (doesn't rattle) than many other types on the market during string release.