AKNES GuliKit TMR Electromagnetic Joysticks for DualSense PS5 Controller, Sticks Replacement Accessories for Playstation 5 Controller, Thumbstick Caps included

these work really well, follow the ifixit guide with the calibration software link. worked perfectly for me. these sticks feel really nice and smooth, the included thumbsticks are good quality and the extra rubber thumbstick caps feel nice too.Desoldering the old stick is a little tricky without the proper tools as the board wicks away a lot of heat so you're going to want to get the stick area evenly heated. A hot air station would be ideal so you can take the whole stick out at once or you can use low melt solder but if you only have a soldering iron and normal leaded solder like me (don't use lead free as high melting point) then heating each of the joints around the stick a few times should get it sufficiently hot to be workable. I unclipped the pots from the housings and wiggled them until the legs snapped then cut the mounting points for the old stick and l3/R3 buttons, it's a lot easier to get the legs out of the board individually with a solder pump than trying to get the whole stick out with a soldering iron

Used older Hall Effect Sticks in the past which are great, thought id give these TMR sticks and try and boy am I glad I did, they are far superior than Hall Effect sticks, much smoother, more responsive and much more accurate!Will happily spend the extra again if I needed these.

I bought the PS5 version and took it to a technician to install as I didn't have the time to do it myself. One of the sensors was broken and didn't work in the Y-axis at all, and the sticks that were supplied were for an Xbox controller so I had to get the stock PS5 sticks put back on.

These are the ones you need. 15min job with the right tools, 2% circularity is better than originals, they even feel better and more precise than originals. And 10x better than the other two types of hall sensor I tried. I've used for 20hours since and they are working really well These are the ones, and I personally recommend them if your doing this upgrade or repair, I don't think you will be disappointed. If I bought a new controller today I'd take it straight apart and fit these lol.

Excellent replacement analog sticks. These are so far the best TMR replacements I've bought with a low error margin on both sticks of 3% after calibration. These can be found for about a fiver cheaper elsewhere but handy if your not willing to wait for them to ship from China.

snappiness and resistance of the stick feels great maybe even better than original alps and the included metal walled thumb caps are extremely smooth. The circularity is extremely good and the stick always snaps back to absolute centre. 10/10 would recommend

Installed the sticks to my controller and all worked fine, after a few weeks one of them developed some issues but the seller sent me a new pair after some back and forth.The included KK thumbsticks rubbed against the shell so I chose to use the old factory thumbsticks instead.Some soldering skills needed, if you know what you're doing then it's quite simple.

Okay, so replacing the old ones with these can be a long and hard process (first-time soldering with minimal tools). The quality feels nice and premium, with the interchangeable thumbsticks being a bonus. They sit nicely and tightly and won't come loose easily. They work perfectly out of the box and required only quick calibration. For the money, I would say they are definitely worth it! It takes some time and patience to replace them.Pros:* Work straight away after assembly.* I've noticed a small improvement in the controller's battery life.* Nice and premium feel, even after installation.Cons:* Takes time and patience to replace the old ones with the new ones. (Not really a con, but I was stuck for four to five hours and didn't have all the tools.)* The thumbsticks might become loose after changing them a few times.Do I recommend them? Yes, absolutely!