OBD OBD2 16 pin Adattatore Diagnostico Del Connettore (per Honda 3 Pin)

Works perfectly with 2022 Model 3 LR. The port is easy to install. I’d recommend watching a video on YouTube on how to set it up.

Easy to use

I did not like anything, never worked. I just did not bother to return.

While this cable states it works with 2015+ Model X/S, it does not (-1 star). The 2021+ refresh moved the vehicle CANbus pin locations on the diagnostic connector from 18 and 19 to 9 and 10, respectively (that is, 18->9, 19->10).This is easy enough to do with a small wire (stripped) from a typical grocery twist-tie, insert about 1/4" from the connector side into the hole above where the mating plug would connect. This will push down the locking tab inside. If you got it in the right spot, gentle pull on the wire should easily pull out the back side. Pictures with pin numbers are here: teslamotorsclub.com/tmc/posts/5821188/Once that is done, Scan My Tesla (SMT) works great! Props to the author of SMT to help me through this process.Other than that, the cable seems to be well made. My OBDLink MX+ fit well into the OBD side of this cable and worked perfectly. Most cables I found were $40+shipping, so at about $13, this was a bargain and I'm glad to have taken the risk, learned more about the connection, and the satisfaction to get it working!

This helped me link a new OBD2 reader to my BMW E39 CAM module in the engine compartment. Worked flawlessly. Had purchased a different brand on Amazon, and that one did not work, so this brand is more trustworthy.

Muy buena calidad de producto recomendado muchas gracias gracias

First, the rating I gave is only because I used this product in a manner not conforming to industry standards. I jury rigged it for my particular project. The item is self was well made and reasonably priced.

Connects between laptop utilizing GuzziDiag Read/WriteThis is the 3-pin/16pin you need.

Good item,thanks

Tout était comme décrit

Works as intended. Connected to K+DCAN cable to run srs abs codes to the 20 pin under the hood for my 2000 323i.My dcan cable has a switch to bridge pin 7-8, but the cable works regardless of the switch position. So either the dcan cable is stuck to bridge 7-8 or this 20 pin has it bridged already.Regardless. Works for what I need.

Comprado para leer códigos de un BMW Z3 del 98. Junto con una máquina Foxwell me funciona perfecto.

Très bonne commande livrée très rapidement. Merci