Mayfair Cameron Sky Blue Toilet Seat, Non Slip Heavy Duty Wood, Easy Clean, Round

I love it ! The reasons I do. It is Solid, a Pretty Blue and there are lots of colors to pick from. The company has a consistent reputation for Quality. Old Working covers hanging around are all Mayfair or Bemis. So that tells you if their still around they are worth buying. The New Screw and Bolt that will never move around. It DOESN'T. Now why would I say that and others have said the opposite. I will tell you why. The toilet seat I had before had the same kind of set up and it was at my place forever and the person before me and the only reason it had to be replaced was that a friend of mine, must have turned a little to the left and a little to the right and made the center hinge come off and that is what led to it's demise. She was a heavy person, but no worse than a kid fidgeting on the toilet seat. I never said a word, but had planned on replacing it afterward, so about a year later I did because I was sick and tired of it coming out of it's hinge while I was on the pot. Nothing like almost falling off the seat. I did bring an extra toilet seat with me from the old home before moving that was new in the package, I figured at some point I could use it. Now was the time and when I put the seat on, I remembered why I needed one in the first place and it was another one of those crappy ones, no pun intended. Yes, I threw the old package away, but it was one that I swear had either cardboard or ply wood to sit on and no padding or not much. It had vinyl on it and a pretty embroidered flower, but just one time sitting on it will tell you it was a health hazard. It not only moved, you had the ring around your butt, not your collar believe me. It was the most uncomfortable seat I had ever sat on. Talk about plastic vinyl and softly sitting on it, no, not at all. It would have cracked and peeled, then sitting on cardboard this winter and the seats are always mighty cold in Maine. So I searched on both Wally and Amazon and this is the one I picked. I had considered a soft seat, same brand but soft to the tush and read many comments and I had seen many photos of yellow foam sticking out of the side of a seam so, I picked this one, A well known Brand that had been around, and the Quality I expected to get at a very reasonable price. You can't ask for better. There is absolutely nothing wrong with the screw and bolt mechanism this Brand has. You don't even need the 5/8 wrench to tighten with. All you do is pop the small covers on the back hinge open, my fingers hurt, so I used a butter knife to GENTLY pop them open, lined it up with the toilet seat holes and then screwed the back on with my fingers while pressing the top of the cover in place and down so it wouldn't come loose over time. When I tightened them the best I could, I took a screw driver and tightened the bolts on top of the toilet cover hinge and it is perfect. You can if you would like, break off the bottom portion of the screw cap that is underneath, but I saved my fingers. It wasn't necessary to do that. So all I had to use for tools were my fingers and the butter knife. I know I will be fine for a real long time now. The soft ones, I likely would have had to replace from a broken seam or it cracking. It is plastic or vinyl and you would expect that, so I didn't get that one. I got the hard, colder one, but it will last. I also remember my Mother as a kid having a seat with a little enamel off in one area. Yes, she had the same kind of toilet seat. As a kid, it drove me nuts to see that when I needed to go and so I remembered it and now I completely understand, it got chipped somehow. Likely something fell from the mirror cabinet and chipped the enamel. So some reviews talk about that, the enamel. It can happen cosmetically, but certainly doesn't hurt the function of the toilet seat cover. So a little carefulness and keeping it clean, i also saw stains some reviewer's mentioned. Well if your in a position where that is going to happen, then you wipe it up after. No worse than a guy not making the hole in the seat, but try to get them to clean that up !!! I did get a kick out of the reviewer that warned about the Self Applied Tanner. So you don't wear that and sit on the seat, you stand up and go and wipe after. But I'm certainly happy with my toilet seat, I'm overjoyed really. It is pretty, it was relatively cheap compared to some that were up to $75 dollars which is really crazy. Their reviews weren't the best either. The seats were really cute, but not at that price and have it wear out just as fast as the bad ones. I highly recommend this toilet seat, and anyone complain, I will give you my old cardboard one. You will never complain again, trust me. Talk about Fake, that was a Fake Toilet Seat.

Lovely, well-made toilet seat. Easy to install looks elegant.

nice item , would buy again

At first glance, this appears to be a simple, easy to install top-mount toilet seat, but it actually uses a hybrid top and bottom mount system. The seat bolts look like simple top-mount bolts, but they are a bit more complicated than that. The product description on the web page says that all necessary tools are included, but that is not true. All toilet seat parts are included, but installation of the toilet seat so that it will not swivel will require the user to supply a wrench or a pair of pliers. A medium size screwdriver is optional, but I found it useful.Pay close attention to the installation instructions.• Open the toilet seat hinge caps.• Turn the toilet seat upside down.• Take the seat bolts, turn them upside down, and push hard to insert the head of the bolt through the bottom of the hinge until it snaps in place and does not fall out when the seat is turned right-side-up.• Turn the seat right-side up. Firmly closing the hinge caps should lock the seat bolt in place, but I found it useful to leave the hinge caps open for a while so that I could use a screwdriver for making the initial top mount connection to the bottom sleeve of the bolt assembly.• Position the toilet seat on the toilet, dropping the seat bolts through the bolt holes in the toilet.• Start hand-tightening the screw-on bottom sleeves of the bolt assembly. Once they are partially attached to the bolt, I found it useful to use a screwdriver to tighten the bolt assembly from the top instead of fully hand tightening from below. Adjust the positioning of the toilet seat if necessary during this step.• Once you have tightened things as much as you can, firmly close the hinge caps so that they click and lock the bolt assembly in place.• To keep the toilet seat from swiveling, you need to finalize the tightening of the bolt assembly from below using a wrench or pair of pliers.• Clamp the wrench or pliers on the bottom part of the screw-on bottom sleeve of the bolt assembly (refer to the illustrations on the installation instructions). Tighten this screw-on sleeve until the bottom section snaps off. Most people would not be able to do this by hand, but would need a wrench or pair of pliers to apply enough torque.• Toilet seat installation should now be complete.

easy to install!

Easy to install and it doesn't come loose!

This HAS to be the best toilet seat I've ever installed. Top quality, solid structure, and has a quality feel to it. I've purchased seats from bargain stores in the past that felt pretty flimsy, but not this one! The quick detach feature is the ONLY way to go. This is my choice for next time!

As far as toilet seats go I absolutely love the MAYFAIR 841EC 000 Cameron Toilet Seat. I love it because there is no wiggle and it stays tight.I ordered this toilet seat in June 2021 and it has had to be tightened again. AS you know most toilet seats have to be retightened after installing but so far this one has not. When I was looking for a toilet seat I loved everything that this toilet seat had to offer.I love that it was easy to install. I love that there is no wiggle! I like that the toilet seat can be removed for cleaning. I love the nice, shiny gleam that it has. I also liked the fact that the Mayfair company has been in business for over sixty years.If you are looking for a strong, sturdy toilet seat then look no further as I believe the Mayfair toilet seat is just what you are looking for. Definitely recommend the Mayfair toilet seat.

Excelente, es lo que buscaba y cumplió mis expectativas

Super happy with this toilet seat. It fits perfectly, looks great and super easy to install. I didn't even have to ask my husband for help. Delivery to Vancouver, BC took a bit longer than expected, ordered it on November 23 and received on Dec. 21. Other than the delivery delay, I am very happy with the product.

I never thought I'd write a review of a toilet seat, let alone a glowing one. We have had toilet seats over the years and they've done the trick. Nothing fancy. The last two toilet seats - before this one - were such a pain or nuisance. Slipping off the porcelain when you sat down. I actually took a while trying to find a better toilet seat. The reviews of this toilet seat convinced me to buy it. It was a little bit pricier than some of the others but we wanted something stable and good. It was easy enough to install. A little different than the other ones but instructions were easy and helpful. Once installed, we checked it out to see if it slid but it was solid. Not only do we like how secure and stable it is but its also comfortable. Best toilet seat we've ever had. Didn't know or cared about such a thing before. I would buy this for any toilet we have in the future.

Liking very much sturdy and well made

Great product. Easy to install. Colour(silver) perfectly matches ice blue toilet.