RESIONE Dental 3D Printer Resin: Dental Resin 3D Printer for Restoration Implant Study Models - Resin 3D Printer Liquid with Not Warped and Very Low Shrinkage for LCD DLP MSLA

Description

D01S is a seashell-colored dental model resin with nano-inorganic powder added. The surface of the printed dental model is matte and has a plaster texture to ensure that it can be scanned accurately. The size is accurate, the surface is scratch-resistant, the shrinkage rate is extremely low, and it will not warp for a long time. It is suitable for printing restoration, planting, and studying dental models.RESIONE D01S Dental Model ResinPrinting SettingsLayer height: 0.05mmBottom exposure time: 30-60sNormal exposure time: 2.1-4.2sCleaning and Post-curing Cleaning tools: ToothbrushCleaning time: Less than 4minsCleaning solvent: 95% Ethanol or IPAPost-curing light source: 385-405nm UV(40W)Post-curing time:10minsShore Hardness:92DTensile Strength: 20MPa Flexural Strength: 39MPaNotched IZOD: 7.9J/m Elongation at Break: 5% Viscosity（25℃）: 435mpa.s Attention! Too long post-curing time will make the resin prints easy to warping, hard and brittle.The resin prints will be fragile after post-curing. It is not recommended to apply force to the prints immediately. Just need to wait for a while until the internal stress of the prints is completely released.PrecautionsUSE：1. Operating temperature: 2535℃,68℉95℉2. Shake well before each use. If the resin is very viscous, preheat the bottle with 60-80℃ warm water before shaking it.3. Please wear nitrile rubber gloves during operation and keep the operating environment well ventilated.4. Do not use resin near windows, balconies, or other strong ultraviolet environments.5. If you accidentally get resin into your eyes, mouth or nose, rinse immediately with plenty of