HIGH FLYING2pcs Interior Accessories Steering Paddles Shift Extensions Silver for Chevy Chevrolet Camaro 2016-2022, C7 Corvette 2014-2019

These fit, feel, and look really great on the steering wheel. 2 issues: One issue I have with them is that if you try to shift by pulling at the very top of the tip (1 inch from the top), you will not be able to without gripping the entire back side or moving your fingers further down the shifter. The problem is the connector of the original shift handle is closer to the bottom, so when you pull at the top, there is not enough leverage to move the shift lever (make the shift). You have to either move your fingers down closer to the center or reposition your fingers at the top to get the right leverage, which in fast high performance shifting, you will miss the shift (it will not move) and have to move to a point further down to make it move.Another minor issue is that these shift handles blocks the radio volume controls on the steering wheel with the extension. You have to maneuver between the tiny space left after installing or just reach up and use the volume control on the dash. No big deal, but I did use the steering wheel controls frequently over the dash controls.

As with any stick-on product, it's all in the prep. Clean surfaces with alcohol prior to sticking the tape. These things look Bad A$$. They are really high quality. They dont really function that well as extensions of your stock shifters tho. When you pull the bottom portion, it engages the paddle but not the top. I suppose if you pull hard enough it may but you can tell they're not designed for that. They really are just for looks. And they look really cool. One review mentioned that they block the audio controls on the wheel. I didnt find that to be the case. There's still plenty of room to get your fingers in there. If you're hands/ fingers are really big, it could be tight but it won't be an issue for 95 out of 100 people. Happy customer.

I was a little hesitant to purchase, since I don't own a camaro, but I was fairly certain they use the same wheel/paddle Shifters. It fit PERFECTLY on a 2015 C7 Corvette stingray. I own a M/T, so they aren't exactly necesarry as I don't have "shifters" but I love the look. Comes with 2 sets of 3M double sided tape, I guess if you mess one up, but It was extremely easy to put on so I don't see that happening. Overall, looks great, looks durable, priced right, and highly recommended.

Initially I was disappointed because one side had the plus symbol engraved, but the minus symbol was not on the other side. But customer service was excellent and immediately sent me out a whole new set, so kudos on the quick response.I did not expect such great quality for this low price, but these things are actually quite hefty and solid. The engraved emblems and the groove on the back side worked perfect for me, as I was able to lay some paint in them to match the 2-tone Kalahari interior of my Corvette. Install was easy, just took my time by very lightly laying them in place to assure they were straight before firmly pressing them down. For me, they did not interfere with the audio controls, but I could see how some may need to get used to them being longer. They definitely give a bit more freedom for shifting instead of basically having to be in a 9 and 3 position on the steering wheel, however they do still need pulled towards you from the side…but that can be done a lot easier in a 10 and 2 or even an 8 and 4 position.

First of all, made in China. And it’s so cheaply made, it doesn’t latch onto the paddles, it relies solely on this weak adhesive lining that goes in the extenders and then you hope the extenders fit your paddle shifters and also the the adhesion makes the two parties stick.This failed, and even without adhesion the paddles shifter extenders aren’t even designed to latch on even slightly. I feel like the paddles should be designed to slightly latch on and the adhesion makes it a tighter fit, but no, it didn’t work like that.I feel like I wasted money on this.C7 Z06

The machining is excellent and the anodizing also very nice. What I didn't like was how heavy they are, the backs are flat aluminum, and they get very cold to the touch. Not very inviting to use in cooler weather. The backs are machined flat so your fingers don't fall into an indention like the factory paddles have. If the manufacturer could machine a contour into the backs it would be more pleasant to use and also reduce weight. I wound up purchasing the carbon fiber ones and I like those better.

These fit the back of the stock paddle shifters surprisingly well. I trimmed the adhesive pad slightly to eliminate any visibility of the adhesive outside of the shifter's profile. Other than that the installation was smooth and easy. I tried installing them with the steering wheel turned so that the shifter was horizontal at the top of the wheel. This made alignment much easier and accurate. This is a very strong adhesive tape and you get no second chance with it. Practice a few times dry to get your technique down before show time.Last, these are heavy cast aluminum painted in one of several colors. If your color is unavailable order silver and paint it any color you want.

I installed these on my 2015 Camaro SS. First of all I ordered grey and got red and their okay but the drawback is that they tend to limit access to my menu button on the turn signal lever and it bothers me so no point of having them on I mean . I have to turn the wheel just a bit to push the button. All in all, it's just a cool looking item that dresses up your steering wheel for a nicer look but if I was offered a refund I’d take it. 4/10 rating

Fit perfectly like the colour and they’re made of light weight metal.

👍👍👍👍

The paddle shifters look great I’m really pleased how stylish they look but they are also functional and work great