Length:5pin | Color:Panel mount x 2set Specific features are as follows: 1. Operating temperature: -45 ° C ~ 105 ° C 2. Relative humidity: 90% ~ 95% (40 ± 2 ° C) 3. Salt spray: 5% NaC1 mist in 48h 4. Sealing: IP68 (2m depth 2h not deep water) 5. Working Current: 25A (2-5pin), 15A(7pin), 5A(9-12pin) 6. Working Voltage and Withstanding Voltage (Sea Level) Working Voltage: 250V (AC) Withstand Voltage: 2500V (AC) 7. Insulation resistance: 2000MΩ under normal condition 8. Contact Resistance: 1MΩ(2-5pin), 2MΩ(7pin),5MΩ(9-12pin) 9. Apply wire: <2.5MM/ AWG12-16---2-5pin,<1.5MM/ AWG14-18---7pin,<0.9MM/ AWG14-20---9-12pin 10. Apply cable diameter: Φ6.0 ~ 12.0mm 11. Mechanical life: 500 times 12. Whole size: 3.39*1.12inch / 86*28.5mm (L*φ) Specifications Material: flame retardant nylon Welded pinhole: beryllium bronze Seal: EPDM rubber ROHS environmental protection materials Gender: male female Combination design style: welding Shell shape: round High pressure: ≥ 1000V / 1Minute (under normal 2.5KV water pouring 1.0KV) Sealed protection: 1meter water depth for two weeks Strong anti-corrosion, anti-light hydration and other functions For machinery and equipment, outdoor LED display.
W**D
Great but could be better
I was supposed at the size of the connectors given it to 12dc @ 30amps. Thus means #10 a.w.g. Wire. The cord grip seem small for #10 2conductor cord. It’s an extreme environment connector so the cord used should match. SJO or SO or SWO type cords should be used. But I can’t see how SO cord with a MSA /CSA rating will fit. So I’m left with the junky SJO RATING CABLE that is not Flexible at all especially in cold extreme weather. I’ll keep these but will have to get higher amp connector so can use better rubber jacket cable.
D**.
Good connctor
The only point what I am not that happy with is that its nut is not that strong and you can not make it really fixed on the base. When trying to disconnect, the base section may spin together with top part.
C**S
THESE ARE NOT WATERPROOF!
One star across the board. The terminals are not waterproof. Condensation seeped through the pin housing on both connectors. I had to discard them
S**D
High Quality
High quality and exactly as described.
R**R
Worked as Expected
Purchased to replace non-water proof connectors on a piece of radio equipment. Easy to install and worked as expected. Connectors seem to be well constructed.
L**S
Wire diameter
Nice if you don’t lose a piece or forget to put a piece on then have to unsolder and resolder
Trustpilot
1 week ago
1 week ago