Magnetic Screen Door Fiberglass-New Upgraded Magnets & Strengthen-Heavy Duty-Durable Fiberglass Mesh Curtain with Weights in Bottom-Full Frame Magic Seal-Fits Door up to 34''x82''-Black

I rarely (close to never) write reviews. I felt a short one was appropriate here.Before buying this magnetic screen (a product I knew little about), I had to do some research (including reading many customer reviews). In fact, there were many options from which to choose. How to decide?Fortunately, among other reviews read, I stumbled upon an article that considered several different brands and highlighted what's important.From the article It was clear that magnetic screens using fiberglass are stronger (albeit pricier). Is there anything more annoying than a screen with holes or tears? So I knew that I wanted fiberglass, provided it was only a little more $. In fact, though, after seeing this one recommended (in the article as well as in its consumer reviews) it's price seemed to be the price of polyester (or whatever the cheaper kind is).Installation was fairly simple. Just as others suggested, using tacks (rather than velcro alone) will provide more reliable closure (and less likely for screen to move such that magnetic closure doesn't work well).Also suggested by others, don't mount the two sides with a tight fit (leave a little slack). This makes it easier for magnets to quickly/fully connect the sides.The magnets are strong/good quality and hold the screen together well, yet not too strong so as to make exit from screen difficult. It's easy to push through screen and exit.One challenge I found is that my exterior door is metal (like many people). So, annoyingly, the magnets try to stick to my metal (I covered the middle with something to avoid that but it's far from a perfect or pretty solution....I only intended temporary use anyway).Seller is excellent. I was missing something in the item. I contacted him and he quickly responded giving me the option of either returning the item or sending the missing parts directly to me (with a longer transit time).Today they arrived direct from seller (as promised) and with a special request I had made (but not reqd.) met. Excellent! Highly recommend item and seller!

We had a different type screen prior to this one. It lasted about 8 years. We super glued it several times, it wasn't this type, but it worked well for our Spring/Summer needs. Our old one was on a spring that held it in place at the top of the sliding door screen, and just draped over the door way. This one is so much better. We did have to take off our screen door to put this up for the summer. I don't know how or if we'll just keep it in place until it goes bad or not. We use this for our dog (50 lb goldendoodle) to go and come as she wants during the warmer weather. I love the magnetic close and it will be much better at keeping the bugs out this summer. I really like this screen. Durability and 'if' we can remove and replace each Spring/Summer is still unknown. I may give an update come Fall/Winter

The screen door installation took about 30min for our case. For those who are thinking of getting these, I would suggest to search YouTube reviews and instructional before installing. There are many re-packaged versions of this product but the installation steps are the same. Here's the steps we took to install the screen.Step 1: We lay out the screen on the door we are installing it on to specifically get 2 things - how much do we need to fold at the top of the screen so the bottom slightly hangs above the door sill (otherwise the screen would scrape on the floor and would not auto-close); and where on the door frame would the velcro edges are likely to sit (so we would do a complete wipe down of the three sides of the door frame to get the best stick of the included velcro pad strips).Step 2: We took the time to fold the top of the screen material (how to fold it? do an accordion fold making sure the velcro straps remain exposed and facing the original direction - this is the time to check YouTube for a visual if you need it). Use staple to hold the fold in place and we did a quick sewing at the top most edge just to be sure (although probably not needed).Step 3: We then place the provided velcro pad strips (cut to about 6 in lengths) on the screen's velcro edges. There are enough velcro pad strip to fill all 3 velcro edges of the screen. We cut them to short length so we can apply and remove the paper backing with better control on the door frame.Step 4: Once the screen is installed on the door, we use the included thumb tacks to secure the top velcro edge better. Then proceeded to adjust the sides of the screen edges to make sure the magnets auto-close.My only gripe are the number of tacks provided. But overall the screen works nicely and keeps the bugs out.

I gifted this to mom. Her kitchen door opens out to her garage The measurements were on point, the quality is great.

It works perfectly and keeps the bags away!

This screen lasted two summer but not two years. Near the end of the second summer, the black housing where the magnetics lived began cracking and breaking. The magnetics fell out and then the screen didn't seal properly anymore. It seems fine for the price but it won't be a long-term solution with frequent use and daylight exposure.