Auto Ventshade [AVS] Carflector / Hood Shield | Fits 2018 - 2023 Chevrolet Traverse, 1 pc. | Dark Smoke - 20274

Thanks to the reviewer who posted pictures showing the deflector installed UNDER the weather stripping. I originally got this out and thought that there was no way the holes would line up and was getting ready to process a return. Thanks to that post and a re-read of the instructions, it was a super easy install on my 2021 Traverse once the deflector was fitted under the weather stripping.Also, be sure to put the rubber pads on the deflector itself...there's no reason to put them directly on the car like the instructions say to. The deflector looks great (gives the SUV a more sporty look), was about $40 cheaper than the GM part and is great quality.

Definitely an improvement to the looks

Very sleek & stylish, I just installed it about 2 weeks ago as of this post. I did remove the AVS sticker that comes on it as you can see it looks much better without it. I would recommend you read the instructions in it's entirety before installing. If performed step by step, per the instructions you shouldn't have and major problems. Pretty simple install with an OE look!!

I found this a bit of a bear to install on the 2023 Traverse. I suppose they did the best they could .I found it very difficult to start the screws. It took multiple steps to accomplish success. I needed to Pre-install the screws to create the threads, then take them out. I also ended up grabbing a chair and climbing into the engine to get a view of the holes which either wouldn't line up perfectly or the screw angled in such a way that it wouldn't engage the threads. I needed a visual. It was a bit challenging fitting a 6'2“ frame in there, but I managed, Plus managed to continually whack my head on the hood..a bit sore today. 🤣Started with a screw driver but ended up using a drill with the clutch, set for very low torque. These new cars use super thin metal, very easy to strip it out.I found wrestling with the rubber seal a super pain. I ended up temporarily removing a few extra plastic rivets.On the driver side I had to stretch the rubber seal to make the holes line up.In the end, the driver side of the deflector shield is about 1/4" further away from the hood than the passenger side. It's not readily noticeable so it's going to stay where it is. Once it sticks, it's stuck.Took over an hour start to finish, not including the time I took to pre-wax the hood, top and bottom in that area.The previous version of this which I bought for a 2003 Dakota had an additional lip on it so that it rose higher off the hood by about 3/4" which helped deflect more debris off of the hood.These new units are so low profile that they really just protect the nose and that's about it, probably for gas mileage concerns.I honestly don't know if I would bother with this again.One of my friends purchased a 2020 Camry and the entire hood was wrapped in clear plastic.I'd probably do a price comparison and try to determine if the additional effectiveness of the wrap is worth the price.In addition, instructions say that I can no longer go to a car wash that uses brushes. That excludes about every automatic car wash within 10 miles of home. Not that I frequent those . I tend to prefer the spray and wash...that's when I find all the latest dings, dents and chips in my paint. 😏

It looks really nice on my 2018 chevy traverse. A little difficult to put on.

Arrived on time, quality product, installation as expected, & looks great. What else could you ask for?

Doesn’t fit a ‘21 Traverse. There are no holes on the underside of the hood to screw in the provided hardware. QR code that is supposed to take the installation instructions takes you to the company’s homepage. When I searched for my car it said “not found”. There are only videos online (YouTube) of other vehicles, mostly trucks. Worthless. To boot, when I went to return it, I had already discarded the surfboard size box it came in, so the UPS stores charged me $7 for a new one.

This hood shield was a very good purchase. Really enhanced the vehicle. Installation was a snap. Followed the included instruction manual, which was clearly written with pictures. I would definitely recommend this to others who are interested.

do the job perfectly

Je voulais l'utiliser pour mon capot de chevrolet Traverse 2021, Mais brisé carrément en deux. Une trop grosse boîte, sans protection. Vraiment très déçu cette fois.

Its okay but sits to high off the hood, going with a flush one.