upHere Graphics Card GPU Brace Support Video Card Sag Holder/Holster Bracket, Anodized Aerospace Aluminum, Single or Dual Slot Cards (Black),GL05

Large graphics cards droop, simple as that! And the very least is that it looks shoddy in your bright shiny PC but it can also cause issues with all that bending of a delicate card going on. For some cases and cards it's pretty simple to attach a support someplace, but not all supports fit all cases, except this one. This is a very simple and effective solution. That fits all the cases I have ever used.Fitting it's best if the PC is lying on it's side so you can sort everything out. The kit consists of everything you see in the picture. A bracket ,some screws and some rubber supports. The screws are in case your existing screws are too short. You remove three backplate screws, position one or two rubber supports on the brace then fix it in place so that your card is level. Simple. I am not exactly sure why there are four screws supplied with the kit when only three are needed! You can place the brace upside down so it screws in to the three backplate holes below the card if you wish, that way the UpHere logo is hidden.Although it does it's job, I would have liked the brace to be made out of thicker aluminum. It works though, so can't really complain.It is somewhat over-priced but I don't suppose they sell many. When you consider how expensive the stuff you are protecting with this though the cost is trivial.

I have chosen to install it "upside down", by using the three chassis PCI screws underneath the graphics card... very stable, does a brilliant job propping up the graphics card // keeping it from sagging under its own weight... QUICK NOTE: I have a much older, smaller graphics card, and the bracket could only do its job if bent slightly downwards (please see attached photo!) — which is easy to do, as the metal arm is made of aluminium & can be bent (a couple of times) without compromising its structural integrity. All in all, very happy with this purchase!!

This graphics card support bracket was very easy to fit and works very well. There is a rubber contact that can be moved into position to avoid fans etc. The bracket is well made. It does not have a foot at the end and is attached with up to three screws to the expansion slot bracket. I have found that this supports and holds my RX Vega 56 Red Devil very well with no sagging. It has only been fitted for a few days so I cannot say if the bracket will last well, but so far it is doing what it is supposed to do. Overall I am happy with this bracket and I would recommend it to others.

Very simply idea, well executed. My RTX 2080 is a pretty hefty beast and I was concerned about a big of droop. I need not have worried as I had my uphere support to rely on. It supports the card easily, looks really smart and was easy to fit. Don’t even think about it just buy one you won’t regret it

It's good enough for the price but it didn't completely fix the sag.To be fair, the card I have is about as big as they get - a Zotac Amp! Extreme GTX 1080 - so it was always a big ask, but the spacers aren't especially universal. I think if it came with another pair of spacers that are 50% longer it would be a four star product - the two places on my card that I could support with the spacers is recessed so the bracket is almost as high as it can go (maybe it actually is as high as it can go) and yet the sag is still present. Much reduced, true, and it no longer feels like a slight knock might snap the PCIe slot off entirely, but yeah.If you care about aesthetics, say if you have a clear glass window (mine is dark tint), make sure you get the bracket positioned correctly the first time because the screws will take a bite out of the finish if you need to reposition them. The finish of the bracket is adequate; the edges are rough but both sides has an entirely OK brushed texture. It's not anodised and instead seems to be painted with a poorly silkscreened logo, I've covered the logo on mine with gaffer tape. I took a star off for this too.

Ordered this to help support my new Radeon VII card and it works like a dream, there is no noticeable GPU sag at all. For £10 I think this is an absolute bargain as I have seen some much more expensive alternatives. The support for this product is also fantastic. If you are worried about GPU sag and are looking for a cheap and easy fix then this is definitely the product for you.

With my heavy GPU sag, I decided to buy something to support it. Wish I hadn't bought this!With the brace being fairly thick my own screws didn't fit so I tried using the screws that came with the brace and here is where my problems started. The provided screws are nearly a centimetre in length is overkill and could easily be half the size. These same screws didn't even fit into the wholes on the brace and I had to force the screw into them as you can see on the photo. When trying to fit it to my computer the screw holes only allow them to go so far in and stop as it is designed for standard length screws.The final issue is the extra stands provided that you can add to the brace to help close the gap between the brace and GPU. While it was perfectly straight, trying to fit the stand it slipped down straight into the GPU fan. Ok, I thought I'll just move the stand somewhere else but unfortunately, the only place it can go is right near where the brace screws are making the stand useless as it needs to be at the other end.Although the Brace is made from a decent material the design of everything just doesn't work with itself, my GPU or case. Personally I'd avoid and buy from a more reputable brand.

Perfect to prevent GPU sag. Fitted to my Cooler Master case to support a ROG STRIX 1080Ti OC graphics cards. Does it very well and is a very simple design which is easy to install.Comes with rubber supports to protect your GPU and comes in a range of colours.