PC Products - 70147-4 PC-Clear Epoxy Adhesive Liquid, 1oz Double Syringe, 4-Pack, Clear 70147

This product worked great! It was exactly what I was wanting - a clear strong layer of epoxy to cover some cracks in a solar panel. It was super easy to use, just needed to mix thoroughly before applying. It went on to the thickness layer I wanted and has been holding up just fine! Good price for a good product!

I tried Kintsugi for the first time.I used this exopy and eye candy mica powder: Kula Gold.https://www.amazon.com/gp/aw/d/B088QT1BS6?psc=1&ref=ppx_pop_mob_b_asin_titleAn art scalpel is useful to remove areas where it smudged. It dries clear. It becomes one with the glitter. If you cut or file it down, the epoxy appears dull. (I suspect that is the same with all epoxy.) I liked the dry time. Pieces suck together when I put them together - I didn't need to hold it very long at all. However, I learned it was better to work in small batches so that it would apply easier- it would get much thicker after a minute or two. It is easy to do a little at a time because the screw cap works like a dream - brilliant. If I were to do it again, I would do it one line at a time and let it dry completely each time. I had some perfect lines and it had set enough to stick together. But when I pushed the next piece on, my other line came apart and I had to redo it. Not the epoxy's fault, I just wasn't familiar with it. After half an hour the whole thing felt really sturdy. I am quite pleased with it and I'm excited to use this exopy on other projects as well.

I used this for gluing a broken piece of ceramic together and also for kintsugi, mixing it with mica for color. It worked great as an epoxy, and for the kintsugi, filled a hole and dried hard as metal. So that function it great. I did however downgrade the “ easy to use” rating, because it didn’t dispense evenly. When I first pushed the plunger, it came out of one side before it did the other, as if there was an air bubble in one side. The amount evened out as I continued to push, and I dispensed more than I needed, to decrease the difference. It did dry hard, as a stated above, so maybe the 2 parts don’t have to be exactly the same amounts, but I did think it was worth mentioning. There was one feature that was very useful. The cap that you put Back on to store it only goes on one way, so you don’t have to remember how you took it off. There is no danger of left over harder in the cap mixing with left over resin in the plunger and glueing the whole thing shut.

It is easy to use and apply.

The epoxy works nicely. Its double syringe is well designed, and it makes it easy to put the cover back on for future use. Highly recommend!

Works well. Nice feature allows you use some epoxy and seal the remaining epoxy for multiple future uses. No all companies have this type of packaging.

The lid for the glue is very cleverly designed so that it can be reset without spilling or mess. It secures the contents and prevents drying out. The dual chamber dispenser is accurate and fool proof. Just mix the contents until it turns a milky thick consistency, place the product, let in dry properly and your project will be secured.

When this product is mixed thoroughly, it performs well, but if you want to pour it, or work it into cracks, the mixing process is too time consuming for the amount of remaining work time. I needed to mix most of the 16 ounces, so I could pour the product into fairly large voids, so I short-circuited the recommended mixing instructions, in order to have more time for my pour and application. That turned out to be a problem. In some areas of my project, where A & B were not adequately present/mixed, the end result was that it did not harden, and remained somewhat sticky. I used this on a piece of apple wood I began turning on a lathe. There were parts of the wood compromised by rot and powder beetle tunnels, as well as bark space overlapped by other wood growth. For the most part, the pour went well, but the material that was not mixed properly, did not harden, and the result was that it did not "tool" smoothly, and it did not attach well to adjacent surfaces. So, I tried again on cracks that were revealed with more turning. I tried mixing a smaller amount. I tried to be more intent in the mixing process (which took longer). I was only a few minutes into the spreading of the product into holes and cracks, when a chunk appeared. Realizing it was beginning to harden, I worked feverishly to use product that was still liquid, but alas, I was only able to use about 80% of my mix before it got very hot, and hardened to the point it was not usable. I will admit, this is my first time attempting this kind of work with epoxy resin, so I don't know if there is a product out there that would be easier for me to get a "total mix" and still have enough open working time to get it applied. I wanted to include pictures, but am not savvy enough to know how to bring them over. Sorry.Ben

Fantastic glue for all those broken objects around the house. Used it on ceramics, glass, metal, wood and anything else that needs it. Easy to dispense the right amount, mix it up and you're ready to go. Make sure you give it some time to cure - it's not superglue but a super glue :-)

Muy buena aunque es muy poco precisa. Huele muy mal pero supongo que es por la resina.

Excelente epóxico, de verdad que sí pega el cristal, ya lo utilice en el cristal de mi comedor y de verdad que sí resiste..

good sturdy extruder

Very good epoxy but heads up - this is an insert that is to be used with an dispensing gun. It's not very clear from the description so I didn't realize. Managed to make it work for me though.