Raptor2K Bedliner Aerosol, Protective Coating, Spray-On Truck Bed Liner, Impact, Scratch & UV Resistant, Black, 13.2 OZ

Good stuff! I used this truck bed liner spray to put a final anti-ricochet/anti-spall coating on ceramic body armor panels which I had first covered with fiberglas cloth and resin. I sprayed both the back of the panels and the fronts, trying the back of one panel first. I got a little pooling/running because I tried to put too heavy a coat on first. Once I was comfortable with the spray rate, the optimal distance, and how much was deposited per pass, I was able to get a nice, even, seamless coat on the plates. I let each coat dry before applying another, thereby building up thickness with each coat. The coating adhered firmly to the fiberglas resin and I would think it'd do the same if spayed directly onto a bare ceramic or steel plate. The color is a nice, uniform, semi-matt black. Just take your time and don't rush the process. I think if you wanted a budget-friendly way to line a truck bed, this product would work...it would just take quite a few cans to get a reasonably thick coat. Not sure of the long term durability for bed liner use, but if you want to coat ceramic or steel body armor panels, this stuff can't be beat - highly recommended for that purpose.

Fantastic product. I used it on my Pro4x Skid Plate since I wasn't crazy about the aluminum color. Lightly scuffed it, and sprayed with Raptor and wowww. turned out great! Cant wait to do my rear bumper. Ive been getting alot of compliments and I can tell it's durable. Make sure you spray from about 2 feet away!

This stuff is great. I scuffed my tool cart lid, degreased with some alcohol, and used the U-POL grip 4 adhesion promoter. Did two light coats of that, and then two coats of this raptor liner. This stuff comes out the can fast and I recommend a test spray on some cardboard. I feel like to got good results from spraying a good distance away and letting it just mist onto the surface. If you want a less fine cost that move closer. 2 coats of this 20 min apart and it’s tough as nails in about an hour. Highly recommend this product with the use of their adhesion promoter beforehand.

The product seemed to be expensive at first glance, but its value became apparent as soon as I started applying it. The aerosol spray fan is decent and it makes it easy to get even coverage over the part. I used this in the inside of my wheel wells to prevent my fresh paint from being chipped. I can't gauge how durable this product is, but after reading the other reviews I'm hoping it'll last for a very long time. It's imperative that you wear adequate breathing protection because I've never seen a paint this irritating before, and ive breathed in a lot of paints. Be careful, wear your mask.

This stuff worked really well for painting the top of my tool cart. I knew it would get a lot of things sat on it so I wanted to increase the durability of the top with a coating.A couple of call-outs:1) Pot life is 60 minutes once mixed2) recommendation is 2 coats, 20 mins apart3) shake it REALLY well. The coating is thick and it will spatter in larger globs if not mixed really well. If you have to stop and shake mid-spray, so it.4) Keep the can moving while spraying and heed the instructions of 2’ minimum distance. It will puddle up almost instantly if you are spraying so start your spray with a sweeping motion.5) there’s a fair amount of overspray and it’s messy stuff so make sure to tape off and cover anything that you don’t want sprayed6) mineral spirits clean this up nicely.Price seems equivalent to other 2k sprays I’ve used. You’re generally not going to find 2k for much less than $30. I haven’t tested the durability yet but will update the review as this ages.I plan to renew an old, red, Craftsman tool chest I have next. I think this will work nicely to bring new life to that old monster.

Great stuff. Expensive. But for small jobs and less clean up its great

When I ordered my bumpers for my Jeep, they came from the manufacturer sprayed with Raptor liner. I wanted everything I added to have the same texture/look, so I ordered this stuff. I don't have a spray gun, nor do I have the experience on how to use one, so this seemed like a good alternative. I am not the best at spraypainting (can't seem to get a smooth texture), but this is pretty much foolproof if you follow the online video directions! It is a 2 part system, not like other spray-on beadliner products. It is very durable, finish looks great. It's a little pricey, but well worth it considering the alternative is having it done at a shop. I've used this on several projects so far!

I purchased the Raptor Black UP4883 Bedliner 13.02 Oz 2K Aerosol with high expectations, but it has been a frustrating experience. The product sprayed clumpy right out of the can, making it impossible to achieve a consistent finish. I don't mind the texture, but it was spotty and clumpy in different places, ruining the look.Not only was this a waste of time and money, but now I have to spend even more resources fixing the mess it created. I tried to follow all preparation instructions carefully, but the results were unacceptable.I would not recommend this product and am incredibly disappointed with the quality.