BostitchFlooring Nails, L-Nail, 2-Inch, 1000-Pack (FLN-200)

OEM flooring nails. I used them in a Bostich air nailer installing oak flooring. No jambs or issues during installation.

Less than I week ago I received two boxes of these nails in perfect condition! Maybe I got lucky on the packing, but now I discover that Amazon won't ship them due to customer complaints. What's the deal?As for the product, I've always had good luck with these Bostitch hardwood flooring nails. Our local sorry big box hardware store stopped carrying this quality brand, and substituted some sino-shabby brand. I don't have to tell anyone who has put in all the time and labor to install a "real" 3/4" hardwood floor how minor the cost of nails is. And how critical they are to your project.Maybe the cut-rate brand is just as good - but I'm not about to risk my project!As for packing the nails - not rocket science. The little boxes are quite heavy and need to be immobilized in the packing. If they bounce around inside a bigger shipping box the nail strips will obviously separate and disintegrate. Based on some of the (many) items I get from Amazon, I wonder if they provide any sort of training to their packing staff.But please start selling them again - wrap them in copies of the Washington Post and solve two problems! The price is very good - as evidence by the exhorbitant alternate price now in effect.Update: 10/12/13: I ordered another box of nails and they came all broken up! :( Evidently Amazon did not listen to my sage advice about "immobilizing" the box of nails in the shipping box. There was a 2" gap at the end of the nail box, the end blew open, and the nails fell out and the strips got broken into 1/3rds or so. At the very least, Amazon, wrap the nail box tight so it won't fall apart during shipping. It is only cheap cardboard!!

This is the real deal. Over 1000 sq feet of 3/4" oak flooring and not a single misfire except.for 1 weak strike.. (my fault). So inexpensive and so good. Shoots these nails with ease. I used 95 lbs on the compressor and never a hiccup. 2 drops of oil down the air hose connector before each use is the key to running smooth. Buy it if you are laying your own hardwood flooring. You need these nails. Not worth the hassle of trying other brands to save a few dollars. You spent thousands on the flooring. Spend 15 bucks for these. You wont regret it.

I first removed a tongue and groove floor installed by a previous owner using 2” 16 gauge brads on an OSB subfloor.The brads were good and removing the flooring took some effort, but when I went back with the new floor I used these 2” cleats. When I needed to correct an error and I tried to remove what I had nailed down, it was amazing how much more bite and hold these cleats had.

Nails came very fast and weren't damaged at all. Used 2 boxs without a single jam.

The nails are great. We DIY'ed about 160 sq ft of narrow-plank hardwood floor using these in a bostitch nailer, never had a nail jammed. This time, when ordered from amazon, the box with nails disintegrated en route because the rocket surgeons put it in a bigger box with no padding and no bag. Two strips of nails came apart completely into individual nails and cannot be used in a nailer.

These are great flooring nails. I bought a Ramsond flooring nailer and these nails worked flawlessly with it ($150@ebay). They load easy and we've only had one jam. (may have been operator error) I was able to take the nailer apart and pull the fragmented nails out. They're a little soft, which makes setting them difficult, but the teeth on the nails get a good bite. I've laid about 900 sq ft of flooring and haven't had but a few squeaks which were remedied by screws from below the subfloor and top nailing.Generally, I'm putting the nails 6"-8" apart with a minimum of 3 nails per board. They lay a tight floor and the nails and nailer are able to pull boards that aren't true in straight and hold them. I've only had a few boxes with separated rows in them. They still load fine and fire fine.

I have a very hard OSB subfloor (Advanteck), that I could not use the hand flooring nailer on. So I used a pneumatic Bostitch flooring nailer. Only when I caused a misfire by not hitting it with a committed hit did I end up with a partial nail.The only issue is shipping, I had 2 shipment where Amazon's employee stuck 15 boxes with air bags to fill the volume of the box. This allowed every one of the cartons of cleats to scatter, breaking some of the strips into tiny pieces.