XtremepowerUS 5 Gallon Bead Seater Tire Seating Blaster Inflator ATV Tractor Car Truck 145PSI 5-Gal Capacity

Fought with a tire for about an hour. Tried ratchet strap, starting fluid, could not get a 14 ply tire to bead up.Bought this and BAM it was on first try.Well build, works great!

It didn’t totally seat the bead on my motorcycle front tire but got it close enough it held pressure and then I was able to add more air and get both sides to seat. This is definitely a very helpful tool!

I did a lot of research to find what would work the best. I looked at units that cost 2-3 times as much. I watched youtube videos on how these work, and read a LOT of reviews and tips from people that own bead seaters. I had a brand new set of garden tractor tires that were mashed pretty flat from being banded for shipment and being piled in a warehouse. I tried every trick I know with no luck. The local shop wanted just as much to mount the tires as this unit cost, so I decided to buy one. I assembled it easily, got it filled with air, and blasted the first tire on the first try and was done and aired up in a minute. Was VERY IMPRESSED. The second tire was mushed worse than the first. I tried blasting it a few times and it almost seated each time, but the rubber was quite stiff. I put the tire in front of a heater and turned it every few minutes so the rubber was quite warm and pliable. This tank blasted it on first try after that! Do I recommend this unit? YES! Zero complaints from me on this. Worth every penny!

I was having issues with the valve sticking open and the tank wouldn't hold pressure. The valve seemed to be creating a vacuum between the two o-rings causing resistance. I removed one them and it seems to work fine.

Couldn't get my most recent set of UTV tires seated. Tried jumping on one bead, ratchet straps around the tire, beating it with a hammer, etc with no luck.Took a couple tries to find the right technique with this air blaster, but once I got it, it worked very well.Basically just set the tire on a couple of 5 gallon buckets with the wheel hanging in the center, valve side up. Charged up the blaster, put an air line on the tire valve running wide open, and blasted from the bottom, opposite the valve. Of the 5 tires I did this way, only one had multiple tires. The other 4 seated first try.Super impressed, would buy again.

This unit is a bit heavy but of good quality for the money. It did what is is supposed to do. The only somewhat issue I had, is the pop-off valve is a bit sensitive. The tank is designed to go to 145psi but it really only lets you get to around 110 psi

You can throw away those ratchet straps.This unit is built with quality parts. The Tank is heavy duty. The black Air guide is adjustable with a locking ring to hold it at different angles and its made of metal. The air gauge is oil filled. The inlet air ball valve is ok. The Exit Ball valve is quality.We had a new lawn mower tire 20x8.00x8 that we just could not get spread enough to start the seal. We put about 90 psi in the tank, put the tire rim on a can so the lower bead rested on the lower rim of the wheel. When we opened the big air valve I believe it scared that tire right on!! Simply amazing.... Best tool ever!!!

I bought this for the same reason other are probably going to. A launcher in saw on YouTube. Fitted it with a 2” PVC tube and will be launching 3D printed stuff from it. I doubt my dog will retrieve them though. The only thing I don’t like is the “Safety” cover on the trigger. When closed over the trigger, it slightly presses on the trigger, which causes it to leak if I’m trying to fill it. I had to remove it or else I couldn’t fill the tank with air. I may try and shave off a few mm of plastic from the inside to see if that corrects it, but it’s not too big of a deal.