Sip in Style! 🐝
The MAMEasy Active Drinking Bottle Set includes two 270ml bottles designed for babies 0+ months. Made from SkinSoft silicone, these bottles feature an ergonomic shape for easy handling, a breastfeeding-friendly teat, and a stylish design with protective caps. They are dishwasher safe and BPA-free, ensuring safety and convenience for both parents and little ones.
| Safety warning | <p>Instructions for use: </p><p>Easy Active Baby Bottle <br>Before first use. <br>• Disassemble and clean the product before first use. Then place individual parts in boiling water for 5 minutes. This is to ensure hygiene. For more information on cleaning, please refer to the appropriate section. <br>• For the first use, but also after prolonged use, the ventilation hole (in the raised bladder at the bottom of the teat) can stick together. This means that no air can enter the bottle when feeding and the teat contracts. Gently swipe over the bladder (ventilation) a few times with your thumb or finger to open the slot again. </p><p>Clean <br>• Disassemble the product into all parts before each use and clean in warm, soapy water. For hygiene reasons, rinse well with clean water before sterilising. Do not use cleaning products with harmful ingredients such as alcohol, chlorine and/or microplastics. Do not leave parts in a cleaning solution longer than recommended - this may affect the function of the product. <br>• Before each use, check all parts of the bottle and pull the teat in all directions. Replace product at the first sign of damage or wear. <br>• For optimal cleaning, the drinking bottle must be disassembled into all individual parts. Cleaning when assembled may damage the bottle. <br>• Suitable for cleaning in the top rack of the dishwasher (at max. 65°C). Items may be discoloured by food. This does not have a negative effect on the material. <br>• Do not use abrasive detergents. Use only soft brushes or soft sponges. Hard cleaning brushes can scratch the plastic. <br>• Ensure that there are no food residues left in the individual parts of the bottle after cleaning and before sterilising. </p><p>Sterilise <br>• For optimal cleaning/sterilisation, the drinking bottle must be disassembled into all individual parts. <br>• Clean all parts of the bottle before sterilising. <br>• After cleaning, you can sterilise as follows: steam sterilisation (electric or microwave, depending on the manufacturer's instructions), sterilise in boiling water (at least 5 minutes) or in a sterilising solution. <br>• Do not leave parts (including the teat) in the sterilisation solution longer than recommended or expose to direct sun or heat - this may affect the function of the product or teat. <br>• NEVER sterilise bottle when assembled. This can damage the bottle and warp the threads with which the bottle is screwed together. </p><p>Instructions for heating: <br>• Heat the bottle by one of the following methods: in a bottle warmer, a container of heated water or under running hot water. <br>• NEVER pour boiling water into the bottle. <br>• NEVER heat or cool a sealed bottle. Remove the protective cap and teat (with the screw ring) before heating, especially when heating in a bottle warmer or in the microwave. Do not overheat as this may damage the bottle. <br>• NEVER place bottle in an oven. <br>• Take special care when heating in the microwave. There may be overheating in places. Do not place the bottle in the centre of the turntable as this may cause uneven heat distribution. <br>• After heating the bottle, always stir carefully to distribute the heat evenly. <br>• When preparing infant formula, please always take into account the temperature information of the food manufacturers. <br>• Boil drinking water and apply to approx. 40-50 °C (depending on the food manufacturer). Only then fill the boiled water into the bottle and fill the recommended amount of milk powder and mix. <br>• It is recommended to stir the food instead of shaking. This prevents air bubbles that can lead to colic. <br>• At drinking temperature (approx. 37°C). <br>• Always check the temperature before feeding. </p><p>Other important information <br>• The bottle is made of polypropylene, a hygienic, easy to clean and relatively soft material. The bottle should not be pressed too hard as this may affect the function. <br>• Do not attempt to enlarge the opening of the teat with a needle or sharp objects. <br>• Do not allow babies to drink unattended. <br>• Always keep bottle dry <br>• Store the suction cups and valves in a dry sealed container. <br>• To freeze breast milk, please use the MAM storage cups. <br>• Only use MAM teats with MAM bottles. <br>• Use only sugar-free food or liquids. <br>• To avoid injury, do not let the baby run around with the bottle. <br>• NEVER put the baby to sleep with the bottle. Prolonged contact with liquids can cause tooth decay. <br>• The bottle teats are compatible with all MAM wide neck bottles and the MAM Trainer+. <br>• Insert the teat into the screw ring of the bottle until it audibly "clicks". <br>• Please keep the instructions carefully. </p><p>Warning: </p><p>Easy Active Baby Bottle <br>For the safety and health of your child <br>Please note: <br>• Continuous and prolonged suction of liquids causes tooth decay. <br>• Always check the temperature of the food before feeding. <br>• Discard the product immediately at the first sign of damage or defect. <br>• All unused items must be kept out of reach of children. <br>• Never attach cords, ribbons, laces or parts of garments to the product. Risk of strangulation. <br>• Feeding teats must never be used as pacifiers. <br>• This product must be used under adult supervision. </p> |
| Model Number | 9995742020 |
| Product Dimensions | 7.1 x 14.3 x 21.1 cm; 137.63 g |
| Item model number | 9995742020 |
| Target gender | Unisex |
| Material-free | BPA Free |
| Number of items | 1 |
| Style | 270ml (2er Pack) |
| Batteries required | No |
| Dishwasher safe | Yes |
| Bottle nipple type | Vented |
| Bottle type | Vented Bottle |
| Item Weight | 138 g |
Trustpilot
4 days ago
1 month ago
