RobertshawDPST Line Voltage Electric Heat Thermostat 802

Quality construction, easy to follow instructions , works well and easy to adjust temperature control, positive "off" position...recommend!!!

Works great thus far. Went back to "old school" because Honeywell/Aube solid states would only last a couple of years at a time

These thermostats are very well made and easy to install. If you do the install yourself, make sure to turn the breakers off and use a line voltage tester before you begin! These are 240 volt thermostats, so don't mess around unless you know what you are doing.Having said that, the install is easy. Just make note of how the thermostat(s) you are replacing, are wired, then wire these the same way. These are 4 wire thermostats (2 red and 2 black wires). I bought 3 of them for our upstairs bedrooms and bathroom, which all have electric baseboard heat. Each room has it's own thermostat.

Great price works well

I would have given it a 5 but seems to be way out of calibration. Set temp doesn't match anywhere near actual reading.

Note that This T’stat requires an outlet box to mount it so you’ll need a standard wall outlet box installed in the wall, run your wires thru thru the box, connect the stat, stuff the wires into the box and then mount the stat to the box. The 2 mounting screws on the stat are the same distance apart as a standard outlet. This stat does not mount directly to the wall like a 24 volt tstat does. It’s line voltage so the wire connections must be inside a box. IMO, always use a double pole stat because it has an off switch as single pole stats do not.

good product at a dissent price

Don't buy it junk, had to replace 2 after 2 years of use!