5.5ft 5/16 Co2 Gas Line Tubing for Kegerator Assembly with stainless steel carbonator cap carbonation cap for soda bottle, Ball Gas Lock Draft beer Red Hose kit for Homebrew

the stainless steel carbonator cap alone is worth the cost. way better than plastic ones. with a regulator and co2 bottle you have all that is needed for seltzer. well worth the price.

Works great! No leaks and no fuss. Great price.

Good price and it does what it odd supposed to. I added a bit of tubing to the Barb coming off of the cap to direct the CO2 into the solution for better carbonation. Also, remember to keep the CO2 tank above the bottle you are carbonating (and remove the quick disconnect when agitating) to prevent the liquid from flowing back up the tube and into the regulator.

It does exactly what it is supposed to do. No complaints.

I attached this to a 6kg CO2 bottle fitted with a regulator set at 50 psi and it works great for making carbonated water. The caps attach well to 1.5 liter bottles (of Schweppes seltzer) which are available in my country (Israel) and the carbonator attaches securely to the caps. It was easy to install as there are tube holding mechanisms which allow securing the tube to hardware at both ends using a screwdriver to tighten a ring that fits around the tube. The tube is long enough to comfortably make seltzer.

Nice unit, I would give five stars, but it leaks at the O-ring. If I can communicate with the seller and resolve this small problem I’ll be 5x5 across the board.I do like it, very easy to work with.

This was combined with the regulator in the picture. The regulator came with thumbscrew hose clamps, so I used those instead. The metal 2 litre bottle adapter is nice.

Using to force carbonate soda. I haven't gone above 40 psi, but it's holding well. I can even shake the bottle and the connection does not leak. I used thread tape to prevent leaks, and it seems to work great