Auto Dynasty (Pack of 1) Universal 7 Inches High Performance Electric Slim Radiator Cooling Fan with Mounting Kit, 12V, Black

Great product and works GREAT!! I am going to help some people out with wiring this fan up.1- Black wire will attach to the coolant temp sender. Note do not attach the connector end to a ground unless youwant the fan to run constantly.2 Blue wire will attach to blue wire on the fan for a pull application and the black wire on the fan willbe grounded to frame or any place on your engine that can work as a ground. I if you want a push fanjust switch wires on fan making the blue wire attached to the black wire on the fan and the blue wire on the fan a ground wire.3-Attach the white wire to the silver stud on the 30amp fuse block.4- Attach a red wire to the copper coated stud on the 30amp fuse and run it to a positive wire that will turn offwhen the ignition is turned off. Or you can run a wire from the fuse block to a toggle switch to turn it on and off.5- Finally attach the red wire to the positive post on your battery.I hope this helps. Note this fan doesn't come with wiring but you can buy the wiring separately. GOOD LUCK!!

Worked perfectly, size was exactly what was described.

good lower volume fan due to sie, i used for low amp pusher thru condenser, very happy

The fan works as it should, but for my installation I have it on an adjustable switch and at slower speeds, the fan bearing is rather noisy. This fan is far from quiet when at full speed, but as it is meant for automotive application, that should not be an issue for most.

With summer daytime temps here in Arizona well over 110 degrees, my car A/C needs help to move more air through the evaporator. I used two of these and it really help keep the inside cooler since the A/C is now cooling better.

Good strong fan hopefully it’ll last.

Be advised you have to pay return shipping if you are not happy with the product

Producto muy bueno. Funciona d maravilla