⚡ Power Your Productivity with Style!
The 30in Hardwired Power Strip in Beige features 8 NEMA 5-15R receptacles, a robust 15 Amp electrical rating, and versatile mounting options. Designed for easy installation and safety, it includes knockouts for cord exit and is ETL approved, making it the perfect addition to any professional workspace.
| Item Shape | Rectangle |
| Color | Beige (not white) |
| Surge Protection Rating | 1440 Watts |
| Amperage | 15 Amps |
| Plug Type | Type B |
| Special Features | 13. Screw the Back Cover on, 15. Turn electricity back on, you are ready to go;, B) For power strips without mounting tabs, but to be mounted with clips, place the unit where you want it to be first, make marks where to install the clips, which normally should be placed about 6" away from each end, and then screw the clips down with screws provided. Then, snap the power strip in on the clips;, 5. Unscrew the Back Cover off the power strip with a philips screw driver;, 7. Put on the 3/8" wire clamp connector (Not included with the purchase) you already have in place. Secure the installation of the clamp connector by tightening the big ring screw (which should be the inside the wall, something like this) with the pair of slip joint pliers;, 6. Take out the white plastic insulation sheet, then use the pair of scissors to cut a hole (about ¾" in diameter) on it for the wires to run through. (If the bottom knockout on the back cover will be used for wire connection, the hole should be in the middle of the sheet, then you will not need a wire clamp connector. Thus, please ignore step 7, 8 and 11 below);, 12. Place the plastic insulation sheet back in position in the power strip;, 3. Choose the side you want the cord exit to be and mark on the Knockouts coin;, 8. Run the wires through the wire clamp connector, from the outside into the power strip;, Additonal Note:, 15. Turn electricity back on, you are ready to go., 11. Tighten the two pressure screws properly on the wire clamp connector;, 10. Match the color of the wires and secure the wire connection with proper wire connectors (different wire gauge use different colored wire connectors);, INSTALLATION GUIDE:, 4. Gently punch off the Knockouts coin marked earlier with the back of a screw driver or other tool handy;, 2. Decide where to place this unit;, 14. Mount the power strip where you want it to be:, 1. Turn off electricity in the house;, 9. Please remember to run the wires through the white plastic insulation sheet (In case bottom knockout on the back cover is to be used for wire connection, please run the wires through the back cover first, now with the knockout coin punched off, from outside to inside);, A) For power strips with mounting tabs on both ends: screw down the unit on the floor, wall or in your cabinet or on your rack, where you want it to be; |
| Maximum Current | 15 Amps |
| Voltage | 120 Volts |
| Material | Alloy Steel |
Trustpilot
2 weeks ago
3 weeks ago
