VEVOR A03 Pro Manual Paste Liquid Filling Machine, 5-100ml Adjustable Bottle Filling Machine with 11.5L Hopper for Filling Paste/Cream/Cosmetic/Perfume/Drink/Medicine/Shampoo/Lip Gloss

Works very good! Only slight dislike is it drips constantly when liquid is in it even when you tighten it up. Other than that, Very convenient and easy to use! Love that it comes already assembled 👌🏾💪🏾

This was the best price I found for this sort of machine. It does need cleaned with mineral spirits before use. I took the WHOLE thing apart and cleaned it first. It was complicated to put it all back together but for the record, I think I went a little overboard and cleaned the mechanical inside parts when I didn't need to. I also went ahead and got some rubber washers instead of silicone. I'm using this machine for silicone based lipglosses and liquid lipstick, so I wanted to use something rubber instead. I got those at the local hardware store. Overall this thing is a pain to take apart clean every time I use it, but that goes with the territory and I am very satisfied with using this machine VS filling my containers with a piping bag or spatula.

I tried to return this or exchange but no one to contact, it's bring out products without control non the first use. When I put in serum or liquid is just coming out , I can't stop it . Weaste most of my products.

If you transfer oils even a few times a year, as expensive as they are, this is a worthwhile purchase! Sleek design, and I’ve yet to spill any of my beard oils. Easy to maintain and clean and is simple to use.

The machine works just fine and is everything I was looking for except it came dirty and rusty

This is a great product for what it is made for and for small projects. The one problem I don’t like is the many small parts that you have to get in there and clean but I guess all the machines like this takes a lot to clean

Just use for the first time today. Not real happy with the directions. Ounce I cleaned it out I set it up and I like using it seems to be faster then filling with a funnel. It may take a little time switching to another vial if it a big differents in size as ther it a bolt on the bottom that comes up and another at the bottom of the shaft that comes down. The price is right I may just get another one and set each up for there own vial.

The media could not be loaded. So my first test initial review:The hopper and base feel pretty sturdy. The top is cheap and will not last long.You will need to clean this machine thoroughly before and after each use. Before you even make a big batch of anything this machine needs to be thoroughly cleaned. They only state to use water to clean the white oil off that was applied before they packed and shipped the product but water will not get the job done. This machine has a oily black residue on it that could ruin your finished product and cost you a lot of money. The machine has some small hard to reach spots where your product will pass through that needs to be thoroughly cleaned before you use it. So make sure you have some pipe cleaners and Q-tips which are not provided. I did an initial test with a small amount of a sample bottle of leave-In I had and it flows through well but it had that residue in my leave-In that came from the machine. That is why I used a sample first because that can cost a small business owner a lot of money. They don't state what this oil is, if it is food safe or not. So you have no idea if it can cause an allergic reaction if it comes into contact with skin. Also it could change the integrity of your products and you will not know it until a customer complains. So it better to be safe than sorry. If you don't have plans on cleaning this thing thoroughly after each use I would not get it. This machine seems like it can be used for different cosmetics but I would proceed with caution on that. If you have different cosmetics you was thinking of using this on it may be a challenge because you would have to clean it after each use and if you decide to do oils you would have to let this machine dry thoroughly or it could contaminate your oils with water. Unless you want to spend extra money and buy an extra fill machine and use it specifically for oils. Even after each use after cleaning you should take off the hopper and the front valve to allow air to flow through because it could become a breeding ground for bacteria and mold and you could potentially contaminate all your products. Also immediately after use this machine should be cleaned and not allowed to sit to clean for later because of all the hard to reach areas that you can't see with the human eye. Do not allowed product to sit and harden inside any of the tube areas. They also recommend to keep it oiled if not in use for long periods of time I would use a Castor butter or Castor oil to keep it lubed up seems more safer especially if your using this machine for cosmetics. Can't speak on using it for food because it has some complicated areas to clean and I would not use this for any food products. I also left pictures of the black specs in the water and a video trying to explain what I mean about the hard to clean areas that would need to dry out after each cleaning.Will update later after doing a big batch and see how everything comes out before I update my review and possibly add more stars.