Auxbeam 4 Inch LED Fog Lights for Jeep Wrangler JK Rubicon Unlimited JKU 2007-2018, 60W Driving Offroad 4" Round Fog Lamps w/DRL & Amber Turn Signal Lights

I have not hooked up the turn signal feature yet but just the sheer brightness of the fog lights are impressive. Nice cutoff that won't blind oncoming traffic, high quality build, and fit nicely. In the second photo is an auxbeam psx24 in the passenger side vs the aftermarket in the driver. Much more focused and brighter than the factory fog lights

easy install..just remove the plastic between bumper and grill..I have used auxbeam lights in all my vehicles with no issues..love it

If you are looking for simple these are not it. Splicing and finding out which wire is blinker or running lamps etc. are needed. Luckily I just did that with the headlights.Once past that and getting the bumper off these are great. Nice and bright. Big fan.

This are really bright. Only had on the mini jeep for only a few days but the difference is amazing. Think that they are worth every penny and should last a long time. Hopefully if they do go out I will be able to order some more. If anything goes wrong with them, I will update but as for now, all is good

As the title states, I wish the turn signal color was more on the orange side. To me its almost a peach color, which is just "not it".Since this product wasn't intended for my use, I am not going to complain about it not fitting, I wanted to use this on a 2012 Dodge Charger SE (3.6L). I like the features this has but the bracket doesn't line up completely, for example only 3 out of 4 tabs actually have places to mount to, the bumper on my car also has some plastic guide pins for this to seat on, I had to trim two of them to make them slightly smaller but the plastic is soft and very easily cut with a utility knife. I also had to drill out the holes on the lights to be slightly larger but that is my fault, I did not have factory lights and so I did not have any hardware to work with and picked up heavier duty stainless bolts to mount this, I could've picked some smaller ones and not needed to drill out the holes larger.Blue wire is for the white DRL and the yellow wire is for the amber turn signal feature. Then a standard red for positive and black for negative. I plan to wire the positive to a toggle switch, the blue wire will connect to my aftermarket headlight DRL and the yellow for each light will wire to my turn signal wires to function as additional indicators.I mainly got these for the clean cut off that they provide, I think they could stand to be brighter as well but they have the look I was going for. Overall a decent light if it fits your needs.

I like how easy they were to hook up. I love the beam pattern. Excellent value for the quality

Product does not fit the Jeep JK/JKU OEM standard bumper mount location. Lens depth is incorrect and the adjustment screw is on the wrong side of the housing.Typical Amazon seller with no idea of that they are selling. Do you have hours of time to waste buying the wrong product for your vehicle? I dont!

Super easy to install, i have a 2008 Jeep JKU and i thought i was going to have to reword the Fog lights, couldn’t be further from the truth! Sure bring a brush because there can be dirt caked on your factory wiring but they plug directly into these Fog lights and there’s no need to rewire! If installing on a new bumper that’s the most ideal time to install before you install the bumper and just leave the wiring hanging down to meet the original wiring and then it’s plug, play, and tuck away for all the low price of these bad boys.

They work well, look good, and do what they're supposed to do.

Buena calidad y buena iluminación ya tengo varios meses con las luces y aun sigue funcionando al 100

The media could not be loaded. It works great, previously has led fog lights that worked good too however dirt got in and moisture got in. I put silicon on the harness going into the light to prevent this, I've done this to my tail lights and over 2 years many snow and rain storms in no issues. Only challenge is finding ways to neatly tuck that wire for the halos in. I put a piece of Clear PPF film to help with the stone chips, so far so good would recommend. They loo great with my headlights too!

Si instalaron bastante fácil

Couldn't get the proper adapters for the factory connectors so I just hard wired them in and they're great.