6 Port 10G Switch, 4 x 2.5G RJ-45 Base-T Ports, 2 x 10G RJ-45 Ports, Web Managed/Unmanaged, Metal Fanless Managed Multi-Gigabit Desktop/Wallmount Binardat Network Switch

It's been running for over 2 months without any issues. It's a good switch and is performing as expected. I have zero complaints and the price point is good.

This is a commodity consumer-grade 5-port unmanaged 10/100/1000 Mb/s Ethernet switch.THUMBS UP: + Functions as expected. Tested all 5 ports; all autoneged to 1G when paired with a 1G peer. Did not test for 10M/100M operation. + Measured transfer rate for random data files using rsync was around 900 Mb/s. The 'missing' 10% is most likely just due to my testing methodology, not any fault of the unit itself. + LEDs: Power indicator, and a single LED per port: Solid indicates link up, flashing is data transfer. All LEDs are green, and kinda wuss brightness-wise, if y'ask me. Little hard to see off-axis. + The power cord is 60 cm (excluding the length of the power adapter and connector). + The case is indeed metal, as advertised. Appears to be reasonably robust. + Stated power requirement is 5V @ 1A, and a wall-wart power adapter is supplied with the unit. It can also be powered via USB using an ordinary USB-to- barrel DC cable (5.5 x 2.1mm barrel connector), which are widely available (e.g. https://www.amazon.com/dp/B073SNC45F).THUMBS DOWN: - The ad lists no dimensions at all. This is a pet peeve of mine about Amazon ads in general. I don't understand why sellers don't provide dimensions on every product they sell. They can show dimensions in the photos, or state them in the bullet points... so easy, but so many Amazon ads are missing this basic info. The dimension of the switch itself are 8.7W x 5.0D x 2.4H cm. The wall-wart is 5.5 x 4.5 x 2.5 cm (not including the cord boot at the long end.) - Somewhat amusingly, as other reviewers have pointed out, the little instructional brochure that is shipped with this unit does not actually pertain to this product itself, if you can believe that. Not that this device really even needs instructions, but nevertheless, it's amusing that the brochure documents an entirely different line of commercial switches made by the same manufacturer, and this 5-port consumer switch is not among them. - Main complaint: The RJ45 connectors are oriented "upside down" w.r.t. common sense: The mounting slots are on the bottom surface of the device (opposite the side where the LED are) and the RJ45 sockets are oriented with the release clips facing the bottom side! So if the device is mounted on a vertical surface, like a wall, the RJ45 release clips are on the wall side, instead of facing the user. This makes it annoyingly difficult to depress the clip to release the connector, especially if your RJ45 happens to have one of those stiff strain relief boots that we all love so well. Those stiff boots are difficult enough to release even when the clip is facing you; but when it's facing away, as on this unit, it's nearly impossible to release without using some little tool to get behind the RJ45 and "lift" the release clip towards you while working from the wrong side. This criticism applies even if the unit is mounted horizontally. There's just not enough clearance between the mounting surface and the release clip to get a finger in there easily.SUMMARY: I'd have been happy to give this product 5 stars, because functionally it's fine, but I took off one star for the lack of dimensions in the ad, the provision of the wrong instruction brochure, and the poorly thought out orientation of the RJ45 connectors, which imo is just an outright physical design blunder.

10G port to my network and used the 2.5G ports to drive my APs. Its unfortunate it doesn't have powered ports, but no big deal. The ones I did find that did cost a whole lot more, and The overall power was under rated for running access points. Good buy. Very happy.

So far, no regrets. I bought this with a new network card. Both were plug-and-play on the spot in under 5 min ... Glad I made this purchase (so far)

I ordered the “Binardat 5 Port Gigabit Ethernet Switch, 5 Ports 100/1000Mbps, Mini Size Metal Case Unmanaged Desktop|Wallmount Plug and Play” to review and to improve the wired portion of my home network. I really like the metal material used for the case of the switch. I also like the compact size of the switch. The simplicity and the effectiveness of the design is a real bonus. The supplied power cord is a bit short but there is an included power block which is rare with low voltage electronics these days. I have no means to test speed claims and this aspect is not of significant importance to me at this time. 4 stars ⭐️⭐️⭐️⭐️– Average to Above Average – At least what you would expect based on the Product Page. Maybe a bit more. A solid product. Recommended.Explaining my rating system:5 stars ⭐️⭐️⭐️⭐️⭐️– Exceeded Expectations – Highly recommend product.4 stars ⭐️⭐️⭐️⭐️– Average to Above Average – At least what you would expect based on the Product Page. Maybe a bit more. A solid product. Recommended.3 stars ⭐️⭐️⭐️– Average to Below Average – A bit less than what you would expect based on the Product Page. Left feeling somewhat disappointed. Maybe you’ll feel differently but I cannot fully stand behind the product.2 stars ⭐️⭐️– Below Average – Incorrect, missing, or misleading information on the product page. Low quality or questionable safety issues. Not recommended.1 star ⭐️– Junk – A complete misrepresentation of the product advertised, severe quality or safety issues. Avoid at all costs.

Easy switch upgrade and works with both SFP+ cables and transceivers from Cisco. Unmanaged but a great price that gives me both 2.5 and 10G connectivity.

Works as advertised, huge bandwidth improvement across my network

I’m going to have to find a different product. Bought 2x 5-port 2.5GB switches for my home and they do start up. However I have 3Gbps fiber internet. When I connect with my desktop that has a 2.5Gbps NIC and attempt to download a large file or use my NAS that has 2x2.5Gbps NIC’s, the connection drops from the NAS and the internet connection disconnects: I have to unplug and plug in all hardware to fix the issue. It is really annoying to have to reset hardware every time I use my NAS or download a large file on my desktop. This product is not working right and is a complete waste of money!

My modem provided by my ISP only has 2 Ethernet ports. With this I was able to split one of them so my friends and I could have a gaming session and not have to rely on WIFI

Tolles Produkt, absolut zu empfehlen , alles wie beschrieben ohne weiteren Kommentar TOP!!

Le produit fonctionne très bien, pas de perte de débit ni de connexion malgré un prix très intéressant par rapport aux cadors du marché.A voir sur la durée !

Bon petit switch qui fait bien le boulot. Les ports font bien du 2.5 GB sans problème.

Petit par la taille mais fonctionne parfaitement. Les débits sont bon. Boitier en métal qui donne une impression de qualité. Rien à dire de plus.