3/4" Powder Actuated Fasteners, Drive Pins with 3/4" Wahser, PW75-75F10, 100pcs/pack
Description
🔧 Fasten with Confidence: Elevate Your Projects!
- BULK CONVENIENCE - 100 pieces per pack, ensuring you have enough fasteners for any project.
- EXTREME TOUGHNESS - Specially treated pins that penetrate dense concrete, masonry, and structural steel with ease.
- ENHANCED STABILITY - 3/4" diameter washer increases bearing surface for secure fastening across various materials.
- PRECISION ENGINEERING - Ballistic point and smooth shank design for effortless penetration and reduced defect rates.
- UNMATCHED VERSATILITY - Compatible with all popular powder fastening systems and single pin concrete nailers.
The PW75-75F10 3/4" Powder Actuated Fasteners come in a pack of 100, designed for use with popular powder fastening systems. With a flat head style and durable zinc chromate finish, these fasteners are engineered for precision and toughness, making them ideal for fastening wood to concrete, steel, and more.
Specifications
| Head Style | Flat |
| Finish Type | Zinc Chromate |
| Item Diameter | 0.15 Inches |
| Number of Pieces | 100 |
| Manufacturer | FVSCM |
| UPC | 671891650454 |
| Part Number | PW75-75F10 |
| Item Weight | 0.2 ounces |
| Country of Origin | China |
| Item model number | PW125-4 |
| Style | Washered |
| Finish | Zinc Chromate |
| Item Package Quantity | 1 |
| Cutting Diameter | 0.15 Inches |
| Measurement System | Inch |
| Batteries Included? | No |
| Batteries Required? | No |
Reviews
F**M
Great Price
Work Great and Hold Strong
F**Z
Quality
Good product quality.
J**F
Worked as described.
Works well.
W**T
worked out well
Product came very quickly and is of high quality.
U**1
Worked when fired thru 2 x wood plate into old concrete
Fired my standard Remington low velocity power drive fasteners and these Fuscm low velocity fasteners through 1-1/2 inch wood plate stock into old concrete slab to test these out. I used a standard manual Ramset powered by green charges. Both fasteners fully seated in the wood plate and concrete just fine. The Fuscm fasteners are smooth shank. The other ones used were galvanized. The fastener head diameter is the same on both (.300”). The head thickness of the Fuscm fasteners is a little less than the other (photo). The shank diameter of the subject fasteners measured at 0.143” compared to .147” on the other brand (including fastener coatings). The plastic flute fit in the Ramset well. I extracted both fasteners to see how straight they stayed. The Fuscm shank bent a bit with an additional small dog-leg bend near the head ( see photo - other brand on left, the Fuscm one on the right). The bending is further reflected in the split in the plate responsive of the increased lateral force from the greater shank bend. In summary, these fasteners worked when fired through softwood (fir) and into cured concrete. These were installed about 2-1/4” from the plate end to help evaluate lateral forces during installation. I would tend to maintain a greater distance from the plate end to reduce the possibility of plate splitting.
K**G
as listed
worked as listed
D**N
Decent quality but....
These work well with very few quality issues. The only problem I've noticed is the washer is a little larger than the brand I usually get. Not an issue if you're just nailing boxes to a block wall, but the diameter of the washer makes it impossible to anchor 1/2 EMT 1-Hole straps as they simply won't fit between the hole and the conduit. 3/4" and larger works fine.
D**R
Very impressive, went into 70 year old HARDENED concrete like it was butter!
Was done with trying to drill into this super hardened cement to place framing hold down bolts! I Loaded these little gems into my pistol grip .22 cal. nail gun and pow, 3 seconds and done. Placed 12 of these within 5 minutes with NO effort. Not one of then bent or blasted out the receiving concrete. Would definitely recommend these, and the are offered in a variety of sizes.
Common Questions
Trustpilot
1 month ago
1 day ago
