6 Pack Led Aluminum Profile, 1Meter/3.3ft V-Shape Led Aluminum Channel, Led Profile with Milky White Cover. LED Channels and LED Diffusers with End Caps, Mounting Clips and Corner Connectors

Amazing for best use of your LEDs.!

Excellent solution for LED strip lighting when you want to hide 1) the strip 2) angle the light 3) cover a joint. Great value for 3m of this aluminium profile with diffuser and fittings.Unlike other reviews I found this easy to fit and easy to get good joints, but I did think about it all before rushing in and used a couple of handy tools to make life easy!As well as the usual pencil/ tape/pilot drill diy stuff, I found having a magnetic bit holder on my driver helpful with fiddly screws held on high, plus a slim mastic-trowel helped ease the brackets open so the profile clipped in quick.I measured placement of the brackets accurately, getting them right into the corners and placed one at each end of each strip, with another in the centre. To fit the profile into the bracket I used a ‘top in first’ method, then clipping in the bottom by using the thin flat end of my mastic trowel to slightly open the bracket. Finished off by sliding the profile along within its brackets to butt up the joint.A little patience and thought and it turned out well, for the cost (c£20 for 6M inc delivery) I’m absolutely delighted.Used this in my van conversion roofline for roofline 12v led lighting - perfect!Yet to have my light strips connected/fitted, but very impressed with quality, value, speedy delivery and ease of fitting/finished look - 5* from me!

First off the pictures show my 2 lengths of led lighting, one I have fitted the defuser to and the other I haven’t. Its your choice if this is what you are after but I don’t think any will not show the individual LED whilst also letting a good amount of light throughThey give a far better look when the lights are off and a softer look when the lights are on. I’ve dropped a star as the defusers do not seem 100% consistent in opacity.They are a bit of a faf to fit but are light enough so I’ve only used 2 clips per length but that seems adequateGood value for money and improves the overall look of the led strip lights, I think the effect would be even better if the were hidden as cupboard up / down lighters or otherwise hidden.It did take me 2 hours to fit for a 5 meter length so allow plenty of time.

Very good item so easy to install and works great.

This product was used on a self built bunk bed and it was easy to install. The support did need a counter sinking prior to screw in to wood. The sizes of the aluminium sections are just a described and can be easily cut with a junior hack saw but will need to file the edges to get a good finish.The diffuser was perfect for what I wanted to achieve, it didnt let too much light from the LEDs though but they enough from the type off led strips I used .

This is an odd mix of well and poorly designed elements. The diffuser cover is difficult to fit, the instructions suggest sliding it on but the lip is not wide enough to hold it so that's impossible managed to click on at least one but it was tricky. The corner pieces are a mixed bag, the strip has to be threaded through them first as there's no other way to get them on which renders the mounting holes pretty pointless in continuous sections - if only they had been in two parts a back and front plate that would have made the whole process so much easier. By contrast the wasll mounting brackets for the straight section are a simple clever click in design.Not sure what the final effects will be but a few small design changes would have made things much simpler.

Good little Led channel set

Used these in my grandsons room with M3 tape. Easy enough to cut and install and look great. My daughter and grandson are very happy with them and that’s all I need.