Wall Mount for TP-Link Deco X68/XE75/AXE5300 Mesh Wi-Fi 6 System, Space-Saving Wall Hanging Bracket Holder for Wi-Fi Booster, Cable Organizer Without Messy, Easy Installation (1Pack)

All the needed hardware is included, works great! Got my wifi up high and improved the range. Needed to get some power supply extension cords tho the 2.1mm x 5.5mm jack mail to female extension, don’t bother with a bulky 12v extension cord. Setup is clean!

Worked perfect for my deco 75XE mesh routers. They are just plastic trays with a couple screws, but I was able to hang them at the same height and away from other devices and electronics that cause interference, one in the bedroom and one in the living room. Now the signal is perfect around the entire house.

Very easy to install. We painted our to match the wall. They fit our routers perfectly.

About the product:I Deco Wi-Fi sits firmly and securely in the base. If you use all 3 network connections and the extension you might have to work it a little, almost nothing, to sit the Deco in to the base.Wi-Fi Signal improvement - YESHome network did improved the Signal strength by lowering the RSSI by an average of 5 to 10. (lower RSSI is better) one of my cameras had an RSSI -56 and now it is at RSSI -45.Installation:Super easy. I installed them at 7 feet high from floor. I had to extend the OEM AC power adapter so I made a power chord extension with a DC Female & a Male Connector 2.1 x 5.5mm and 18/2 lamp wire (I’m no electrician but I think that 20/2 wire can also work).

Works for my three floors. T-Mobile 5G Home modem on top floor, Ring Doorbell on first floor. I hardwire from top to bottom unit to get 400+ at both units Prior via WiFi bottom was 100+ download.

The easiest thing you can do for stronger wifi signals is to install your AP's up high as WiFi signals radiate downward. These wall mounts were the solution for my Deco XE75's that I have. The wall mounts come with screws and anchors to mount them and a little instruction guide.Installation was a breeze. Simply determine exactly where you would like the mount to be mounted. To do this, i just placed a Deco in the mount (so I can see exactly how much clearance i had to the ceiling), held the mount w/Deco against the wall and use a pencil to mark the base of the mount. Next, I removed the Deco, located my marks on the wall, held the mount to the marks and put a small level across the top of the mount to ensure is was level and used a jeweler's type of screwdriver and pushed it into the wall where the screws go for both sides. Once that's done, you can put the mount down and push the anchors into the wall, line up the anchors to the screw holes in the mount and screw it in. Simple!Just run the wires up into the back of the mount, connect your Deco to the wires (power and/or ethernet) and installation is complete and you now have stronger wifi signals with further coverage (reach) versus the Deco sitting on a desk, table, or shelf. See attached picture of my installation. I did hide the wires with a white wire channel for a clean appearance. If you found this review helpful, please let me know. Thanks for reading my review. Cheers!

Easy to mount. We bought AXE4900 units and these mounts fit them perfectly.

These cradle the Deco units perfectly. They hang on the wall getting the mesh devices out of the way. They also have space in the bottom to wind the extra cord length to make a very neat installation.