Dual RV Backup Camera System Upgraded: No Lag Easy Installation Plug and Play 7" Monitor HD 1080P Rear View Camera Wired Kit IP69 Waterproof IR Crystal Night Vision for Truck Trailer Camper Tractor R4

I replaced an old, after-market camera and monitor previously installed in a 2011 Ford Ranger truck, with the Rohent Camera and 7” Monitor Kit. After an approximate installation time of 2 hours, the camera and monitor work flawlessly. While I purchased this camera and monitor for a small pickup, the kit provided is designed to accommodate much larger vehicles, such as RVs.In the box:• One 7 Inch monitor with Sunshade.• One reversing camera.• One camera to monitor video cable, 66 feet in length.• One power cable with monitor connector, approximately 8 feet in length.• One monitor extension cable with two connectors so that a second camera can be connected if desired.• One cigarette lighter adapter cable with monitor connector.• Miscellaneous accessories including wire clamps, monitor adjustment knobs, etc.• QR Code linked to installation video.Comments:1. Installation time required around 2 hours. The installation is not difficult, but running and securing cables is time consuming.2. Video from camera and monitor is excellent. The camera and monitor display vivid colors and very clear details and background.3. Since this kit is designed for virtually all sized vehicles, 66 feet of video cable was included. I needed less than 20 feet, so approximately 45 feet of cable is coiled under the driver’s seat.4. Since I chose to tap in to the rear backup light for monitor power, rather than using the lighter adapter, the supplied power cable was too short. I extended the power cable with a cable splice. When I shift the vehicle into reverse, the backup camera display is activated.Ratings (1 to 5):Monitor and camera 5Video quality and detail 5Length of video cable 5Length of power cable 3Installation video 3Installation time 5Based on my experience thus far, I definitely recommend this Rohent product for those who need a backup camera on a vehicle without that capability.

The media could not be loaded. The Rohent R4 Wired Backup Camera System is very easy to set up right out of the box.Since the entire unit is "hardwired" from the monitor to the camera, there's no need to worry about missed Bluetooth connections, wireless distance limitations, etc. Just mount your camera and run the cable to your monitor.The monitor has a also has power connection plug/cable that you will simply plug into your 12VDC accessory outlet. Right out of the box, everything worked well with the default settings.The only significant function I needed to adjust was the image rotation since mine was upside down by default.While I'm on the subject of adjustments, let me explain the adjustments menu is easily accessible and has 4 adjustment categories: (see photos)(1) "Pic"--This is basic adjustment of Brightness, Contrast, Saturation Level, and Color Tint.(2) "Car"-- This gives you ability to turn off channel 2 so it doesn't appear in the menu.(Of course, if you also have a 2nd camera installed on CH2 then leave CH2 "On")(3) "Mode"--This gives the ability to independently Rotate and/or Flip (Mirror) the view of either of both of your cameras.There is a "Zoom" function to change from 16:9 ratio to 4:3 ratio.(The supplied monitor is 16:9 ratio so I don't know why you would ever wish to change this.)(4) "Settings" --This gives the ability to change the language, see the firmware version, and do a factory reset.Note: You will not find the alignment gridline control in that menu.Knowing that typical users want to quickly & easily turn that on & off without navigating menus.Rohent smartly put that function on the SELECT button --just toggle it on/off with that button---no need to find it in a menu!The system boots up very quickly.The image quality is great, especially since it's 1080P on the nice 7" screen (which also has an optional hood to prevent glare on the screen.)The angle of view seems really good--wide without causing too much distortion.The night vision works well also as expected.If you prefer to ONLY have the camera on when backing up, you can connect the blue trigger wire to you reverse light.The only function I would like to see added is backlight control to allow compensation for those times when the sky is a lot brighter than the road down below.

One of the standout features of this backup camera system is its high-definition 1080P resolution, which delivers crisp and detailed images. The wide-angle lens provides excellent coverage, minimizing blind spots and enhancing visibility, especially in larger vehicles. Additionally, the night vision capability ensures reliable performance in low-light conditions, allowing for safe maneuvering even in dark environments.Another point I like isthe easy Installation and expandability. The setup process is straightforward, even for me without prior experience. The majority of my installation time was spent positioning the backup camera in a way that preserves the overall aesthetic of the RV, the cable connection is vert intuitive. The system also offers the flexibility to extend to two cameras, making it convenient for those who need additional viewing angles for improved safety.I also want to mention the backup camera is waterproof and durable construction. The camera fully functions in the heavy rain. This level of durability makes it a dependable choice for long-haul trips and outdoor adventures.The last but not least is the large screen for better viewing. With its sharp image quality, it makes the system a reliable and efficient solution for enhancing rear visibility in big and oversized vehicles. Recommend this system because it delivers all the fronts you need.