Gyeon Quartz Q² CANCOAT - Hydrophobic Spray Ceramic Coating - Deep Ceramic Shine - sio2 Nano Ceramic Spray Coating - Ceramic Car Coating Premium auto Detailing Supplies

I cleaned, decontaminated, clay barred, corrected, prepped, and then used this as an LSP. Shortly after, I took my bike on a 3500 mile trip.This did an amazing job of keeping my bike protected. I washed it after the trip and had a chance to really look it over after it had been through hard rains, dusty roads, bugs and more bugs.I am very careful when I wash the bike. Washing is way easier than before applying.When I say there is a learning curve, it's an easy sealant to apply, but you have to work quick and be ready to follow up after applying with a dry clean MF towel to get all all excess off and buff to a nice shine. When you get the hang of it, it's easy to apply and leaves an exceptionally nice looking, protected finish.

Being a detailer I’m always trying new waxes for my vehicles. The can coat is the best wax I’ve used so far. Very easy to apply, very quick to apply, and lasts long. I unfortunately live on a dirt road so most waxes won’t last long on my car due to the dust. But I am very proud to say this wax is different then any other paste wax I’ve used. I applied a coat on my car in mid April and it still beats water in august almost as well then. Now this is with washing the vehicle every 2-3 weeks but I can’t beat it! Great product 10/10

It might seem expensive but ease of use and good protection trump the cost. I get 3 good applications per can on a 2018 Goldwing. Early Springtime I’ll put two coats on and then do a maintenance application every 4-6 weeks there after (depending on weather and dust conditions).After two years of use here’s some tips:1. I found out not to apply in direct sunlight. The coating seemed to dry out too quickly leaving streak marks that could not be rubbed out. Apply on a cool overcast day.2. Apply on a cool service. I have better results when temps range from 55-65.3. If applying multiple coats, let the first application gas out and cure overnight. Second coating will require less product and go on smoother.4. I use Meguiar’s quick detailed prior to application! I find this prep work deepens the color of the finish and preps the paint for a smooth finish application. This process takes twice as long as the ceramic coating but contributes to a more appealing deeper finish.5. Do not overspray on glass or chrome pieces!6. Periodic follow up coats will help maintain the protection and appearance of you finish!

Product is easy to use and finishes well. It took longer than expected to arrive

When a car is properly prepared and this is properly applied, the result is fantastic. It provides a great glossy shine and a ceramic protection layer that should last at least six months.Prep the car correctly and watch the video on application. Clean/clay/polish the car and then be sure to use a cleaner designed to strip all waxes, oils, etc., from the car. Gyeon sells one, I used one from Meguiar's. The ceramic won't stick to an oily/greasy/waxy surface.Apply a small amount at a time to about a 3'x3' area and immediately wipe clean. You don't need to buff it in, just wipe it on and wipe it off. Apply the product to your application towel, not directly to the car. Those who complain of "overspray" obviously sprayed it directly on the car and it drifted to trim, glass, etc. That's why you don't do that. Don't let the car get wet for at least 12 hours, preferable 24 while if cures. Also, apply out of direct sunlight to a cool car - take time to plan when you're going to do this - a cool overcast day with no rain in the forecast, or in a garage.Yes, it's a ceramic product and the towels you use will solidify and harden just like the protective layer on your car. Thrown them away when you're done. A premium microfiber towel is about $2.50 when bought by the dozen. If throwing away a $2.50 towel is painful, you shouldn't be using a $60 ceramic coating, IMHO.

I did paint correction on my 2005 Subaru WRX STI a couple of months ago, but never got a good protective coat on it. I decided to try out and put Gyeon CanCoat on it. Super easy to put, can be applied to everything on the car, and will last 6+ months. I plan to get parts of the car resprayed so I didn't want to put on anything too long-lasting or expensive.Prep is the most important part for gloss, so wash, decon, clay, paint correct, and do an IPA wipedown before you put this on.I'm very impressed with this.

I polished and clay barred my car and then applied this product. It was very easy to apply so I added a second coat the next day. Wipe on and buff off. How long will it last? I don't know but I drove in the rain afterwards and the car remained clean.Edit: The double coating degraded substantially in just a few months. I was hoping for at least 6 months so I'm a bit disappointed in the durability. I did a single coat on my wife's car and it degraded very quickly.

The media could not be loaded. First off, this stuff stinks. Literally. Almost like turpentine. Do not use indoors. Second, this isn't a wax, but a finising coat that's hydrophobic, shiny and long lasting. If your cars finish has scratches, this will not fix those. But it'll make the wax job you do have, pop.

I have purchased this product twice now. Absolutely amazing!!!The ease of use and gloss is Absolutely amazing!!The product goes a long way

Exelent product

Habe das Produkt schon lange im Einsatz.Das Auftragen ist einfach, sofern die Vorbehandlung der Oberfläche passt.Nach dem Aushärten hat man für zirka ein Jahr eine super Versiegelung. Vorausgesetzt man pflegt das Fahrzeug dementsprechend, also keine Waschstraße.Bei Auftragen umbedingt eine FFP Maske tragen (siehe Anleitung) und gut Lüften.

Einfache Anwendung selbst für Laien, geniales Beading/Sheating, hohe Resistenz, klasse Preis.Standzeit zirka 6-9 Monate.Super Produkt !

very good product