Bosch00631200 Dishwasher Drain Pump

Good quality. Appears very close to the original factory pump. The original pump has turned yellow with age (10 years). This new one is a good fit and working well so far.

Perfect fit replacement for the Bosch OEM motor which cost atleast 4 times this one. I replaced it myself (amateur DIY homeowner) with medium level of difficulty, mostly because of the tight space underneath the dishwasher, many months ago and the dishwasher has been running great and it's super quiet self.Would recommend to buy this and DIY replace yourself to save $400 or more that the repairman would charge.

Fit and worked perfectly! Thanks!

It is OEM part - i.e. by Bosch and identical to the motor that failed.It helped me to repair my Bosch dishwasher model SHEM63W52N/11 with E23. The problem was a bad drain pump. It started to leak, and water got into the motor. I actually could see the puddle of water under the motor. I've got a new OEM motor on Amazon https://www.amazon.com/dp/B01KR5ARPA . Works great again.My dishwasher was bought 06/2019 - so for 5.5 years it worked without a glitch. Hope to get another 5 years with this new one.Attached photos: 1. old (on the left - darkend one) motor and the new motor 2. Installed new motor.

Does exactly what it's supposed to. Slightly tricky to get to it on our model with the built-in plastic underbelly drip tray, but completely doable yourself. Two screwdriver bits required (philips & torx). Nothing else fancy. Solved our E23 error and got us up and washing again.

The serial number may match, the model number may match, the Bosch support site may has this is the right part to fix your E23 error. Do not believe it. Installing this completely destroyed the control panel on my dishwasher.

OEM direct replacement. Solved our issue with E25 error code flashing every other cycle (drain pump blockage or failure). Old one looked ok but we could tell a difference with cleaning performance after we replaced it with this one.

Perfect fit for my Bosch SHX68T55UC/07. I watched a bunch of YouTube repair videos and it seemed easy enough, so I ordered this part. Turns out this dishwasher model is bit more enclosed on the bottom, so only access to this pump was on the right side. At first I thought it was too tight for me to fit my hand in and perform the install, but I gave it a try and to my surprise I was able to turn the old/failed drain pump counter-clockwise to remove it. Then I got this new drain pump in the same spot and was able to turn clockwise to install. (Be sure to double-check you got the pump all the way in so you don't get a leak. After I made my install, I double-checked and I'm glad I did because the far side wasn't in all the way. It was impossible to see because how enclosed my dishwasher is, so you have to feel around to make sure its in all the way.)About 30min of effort and my dishwasher works like new again. With the old drain pump, it had been loud for months and finally stopped draining the dishwasher (posted error E25). This new drain pump is quiet and has no problems. I run my dishwasher on a daily basis, so my 2016 Bosch gets lots of use. I was so happy to find out that I could replace this part myself and for about $25. I can only imagine how expensive calling a repair person would have been.