Air Lift 1000 HD Air Spring Kit for 2019-2026 Ram 1500-60828HD

Easy to install. And WAY BETTER THAN TIMBREN. Timbren beat you to death if you're bouncing on them. These allow a cushion. Soft or stiff it's your choice and the price is great. I had these on my last truck for several years and got a new truck and it was the first thing I added. The air easily adjusts the height/support, so it's super easy to level out a load, camper etc. And they are made well too. Installation instructions seemed harder than it was. I jacked up the rear end at the axle (let the tire hang), which spreads the spring. I DID NOT disconnect the shock. I took the cap off the airbag, stood on it to get the air out of it, replaced the cap and shoved the flat bag between the spacing. Be sure to stand it on the right end. Once in there, you're not getting it out without cutting it. Once it's in, uncap and it inflates to fill the spring. Then connect the hose w hard spacer to protect the valve and run your line to the back bumper. I was able to thread the tubing in the frame and bring it out to a T joint and drilled a hole next to my plate for the valve to inflate both bags at once. I really like this system. Perfect for hauling a camper or heavy loads.

We have a 35' travel trailer that we tow with a RAM 1500 v6. Tows fine but was dealing with a bit of squat. I researched these and found they had great reviews and figured for the price would give it a shot. Install was super easy ( follow the youtube videos for doing the hotdog bun method) and more time was taken getting setup with the jacks than anything else. I did the jacking by the hitch method and put jacks under the frame for safety. Took the wheels off and went at it. As mentioned i followed the hotdog bun method by taking the filler cap off and folding and ziptie together, then replaced the cap so it would hold shape. FYI, before starting, do as I did and let the bags and air line sit in the sun to soften up to make it easier to work with. They slipped right in, then I removed the air cap and cut the zip ties to allow to expand. I made sure in position and put the valve stem on - as mentioned in the directions DO NOT use any tools to tighten and just do finger tight. I ran the lines through the frame rail and also bought the aftermarket T made of metal versus the plastic one - cheap insurance. I drilled a whole near the license plate for the air filler. Total time was maybe 90min as I also took time to rotate my tires. Follow the directions to inflate to 5-7lbs and do an air leak check at all connections. First trip out was this past week and inflated to 45lbs it only squated 1.5in compared to closer to 5 without! Also, these aren't a lift system meaning when you inflate the bags your rear isn't going to lift up. It's more of a bump stop limiter. very impressed and since I lease the truck, i can remove them as needed - little more work as you have to follow the factory directions in removing the springs, but still not a huge deal.

I like to put a ATV in the bed of my 2019 Ram 1500 Laramie, while I tow a 5x8 trailer with a second ATV. But I was having a ton of sag in the rear end of my truck. I bought these to install my self. I'm mechanically inclined but limited when it comes to vehicles. This required me to remove both rear tires of my Ram and really get under the truck to inseart these between the coil springs. I could have done this myself if I had a lift that would have raised above my head. So I felt that it was just a bit too much work for me to do, with the high probability that I would screw it up. I opted to contact the local shop that I have put tires on and asked if they would do it. The local shop charged me $100.00 and installed them for me on their lift. Once installed I noticed a huge difference right away with the more stiffness of the rear end. Less bouncing all over the place. I love my Ram, but I had always noticed that it would sink when I would climb in the bed of the truck more so than the F-150 I had before. These Air Lift's work so well in fixing the sag. I can put the ATV's in with no issues. I like that the valve stem can be run independently to either side or linked together. I linked mine together so one valve controls both sides. Very simple to air up and to remove pressure as well. I highly recommend. I've had these on for over a year and my only regret is that I didn't do it sooner.

I bought these hoping it would help with some of swaying I was getting when towing my travel trailer. It worked very well these combined with a weight distribution hitch is the way to go. Installation was easy once I figured out one side the second was very simple.

PRO's: Purchased mine Mar 3, 2025, installed easily, highly recommend watching the installation videos. The sweet spot for my set up (2021 Ram 1500, 5.7, pulling Alliance Delta 252RL) is 45psi which keeps the truck and trailer both perfectly leveled. After two short trips and a third to Arizona from Texas I couldn't be happier. Until..... CON's: Our 4th trip from Texas to California started great, then out of the "blew" my right airbag popped like a loud balloon. Scared the bajeezers out of my wife and I. We're currently on our way back home and although I feel pulling has been safe during the trip, the drive doesn't feel near as comfortable and stable as it did before. Deciding what to do now, I'm torn. Really like the air bags, but do not want to be purchasing over and over if this is common. UPDATE: After contacting Air Lift, I was sent a replacement immediately. Looking forward to being back to my level ride!!!

Put these on my first Ram 1500 and worked like a charm. With 30' travel trailer hooked up, no more sag. Truck was dead level. Recently replaced the Ram with a new one, ordered new airlift air bags same day I picked it up, had them on 3 days later. Easy to install, no need to remove springs, just passenger side wheel and both wheel well covers. Jacked the back up at the hitch and sprayed the springs with soapy water, not the airlift bags. Use some stronger lock ties than the ones included. I broke 3 of them trying to hold bag squeezed tight. You-Tube very helpful over enclosed instructions. Enjoy.

Très bon produit facile d'installation.

Before installing the air bags my truck had a huge sag but now it’s levelled right out! Travel trailer is about 32 feet long and 5500lbs. The box comes with a picture of a 4th gen ram but don’t worry it fits a 5th gen ram 1500 just fine also I believe that air bags are compatible with both trucks. Very easy to install with the right tools and YouTube videos!

These have been great for towing our trailer. No more sway. Install was easy with the hamburger bun method. Squish the air out of the bag and zip tie it. Insert bags into springs and cut the zip ties. Docking 1 star for incredibly cheap hose clips that come with it. You are likely to break a few and there is no extras, so be prepared. I would also suggest getting a push fit T fitting instead of the T that's included, it's almost impossible to push into the hose. Ran the hose into the T and up into the truck box, no holes drilled. No leaks. Bags themselves seem durable. Will see this winter if they survive.