APEC Water Systems ROES-UV75-SS Top Tier Violet Sterilizer 75 GPD 6-Stage Ultra Safe Reverse Osmosis Drinking Water Filter System, Stainless Steel UV Housing

1. The system works great, UV nice +.2. Adding the Permeate Pump (bought separately and added, not too hard) is key.https://www.amazon.com/dp/B00SD73DA6?psc=1&ref=ppx_yo2ov_dt_b_product_details3. Add the leak detector shut-off for peace of mind.https://www.amazon.com/dp/B0B9R6NKGQ?psc=1&ref=ppx_yo2ov_dt_b_product_details4. The ice maker kit is also a nice add and easy to do. You also get the extra line, which you can use for pump installation. https://www.amazon.com/dp/B00N5D7ZFW?ref=ppx_yo2ov_dt_b_product_details&th=1The system is working great. I tried a Brondell Circle system first; it did not make the cut and water just dribbled out, so after checking into RO systems more, the APEC came in as the clear winner. You can't miss this system, yet I do recommend adding the Permeate Pump and an auto shut-off valve device, both sold by APEC and you can order on AMZ. Lots of testimonials on the value of the pump. It is a bit work work and planning vs the other options, yet you are getting a system/filters that are designed to last a year vs 6 months. You also get the UV which is nice having well water. Just change things out according to product details depending on your water source. The ice maker add is also working fine with this source (recommend removing any water filter in the fridge, you don't need it or to keep paying for refrigerator filters); the espresso machine loves the RO water, the humidifier no longer has gunk in it, the water we use for tea does not leave sediment/film on the boiler, and it tastes good too.When adding the pump, watch a couple of YouTube videos. KEEP the shut-off valve. You'll need a bit of extra tubing (again, you can get that with the fridge option kit). I drilled holes in the mounting bracket and added the pump clip there with a little foam in the middle to absorb the clicking sound. I also put foam around the drain tube coming out of the pump. That cut down on the noise, yet it really is not that bad. It will really go click-click during the fill and then refill at first use, which is totally normal. After that, it only clicks a bit to keep things topped off.For the leak detector, I recommend adding that after the installation to make sure there are no leaks initially. Also, don't put the expansion pill until you have it installed and there are no leaks. You don't want it going off early. The shut-off valve has some slight screening in the plastic, I suspect this could get clogged (especially if you are on a well like me) over time since that shut-off is connected to water coming in (Pre-Filter), yet that is where you want it. Make sure you remove some of the foam on the bottom to allow water to flow to the pill material so it can expand and shut off if needed. You don't need a 1/4-/2 inch of water under your sink; you want that shut-off valve exposed to water quickly if there is a leak. There are easy to remove cutouts in the foam. Those cutouts allow the water to reach the device. Also, don't put it way in the back; keep it where you can get to it.Again, for $15 get the icemaker kit too. You get an extra line that you can use for the pump if you are going keep using the existing icemaker/water line to the fridge. That is what I did, worked fine.Overall I am totally impressed and satisfied all the way around with APEC product and their customer support. I called them a couple of times before buying and they were really good.

I don't do much reviews but I really like this system and the water tasted great. I did alot of research and decided to go with this system for my first RO system because it came with uv filtration and akalinize the water. Instructions and installation was straight foward. I had no leaks. The thing I was confused about was the uv beaker and oring. I didn't see any instructions for that unless I overlooked it but ive included some pictures how to install it and also the uv installed first. Ive saw alot of reviews complaining about the water coming out hot from the uv sterilizer so I decided to go with installing the uv sterilizer at the beginning of the system. You can just install the way it just run the water till all the hot water is out the system. My thought behind installing the uv first was that the water would be sterilized first before going into the filters so there wouldn't be any organism living in the filters and also the water would have time to cool down from the uv. There's directions how to reverse the uv in the picture gallery from a other reviewer. Tap water 284 tds, filtered 42 tds. Bottled water was 32 tds, 8 tds difference. Overall great system!

I have been using the APEC Water Systems ROES-UV75-SS for some time now, and overall, I’m very satisfied with its performance. The filtration capability is excellent, significantly reducing TDS levels from 181 ppm in my tap water to just 6 ppm in the purified water. The taste is noticeably clean, and it performs on par with or better than bottled purified water.Pros:✅ Strong Filtration Efficiency – The system effectively removes impurities, providing very low TDS levels in the output water.✅ No More White Residue in Humidifier – One of the best results I’ve noticed is that after switching to this RO water for my humidifier, there is no longer any white powder buildup on the floor, which used to be a major annoyance.✅ Wastewater Can Be Repurposed – While the system does produce a fair amount of wastewater, I use it to water my backyard plants, so it doesn’t feel wasteful.Cons:❌ High Wastewater Ratio – The TDS of the wastewater is slightly higher than the input tap water, measuring 200 ppm. Although expected with RO systems, it’s something to consider.❌ UV Light Stays On Constantly – This is my biggest issue. The UV light does not turn on and off based on water flow; instead, it remains on continuously. This leads to a slight increase in the temperature of the filtered water, making it lukewarm instead of cool. It would be much better if the system allowed the UV light to be flow-activated rather than always on.Test Data:• Tap Water: TDS 181 ppm, EC 382 μS• RO Purified Water: TDS 6 ppm, EC 14 μS• Wastewater: TDS 200 ppm, EC 421 μS• Bottled Mineral Water: TDS 77 ppm, EC 163 μS• Bottled Purified Water: TDS 31 ppm, EC 65 μSFinal Thoughts:If you’re looking for an RO system with strong purification, this is a great choice. The UV light issue is the only thing that prevents me from giving it five stars. If APEC updates the design so that the UV lamp only activates with water flow, this would be a perfect system. Otherwise, I highly recommend it!

It’s amazing. Everyone complains about the city water and here I am drinking from this filter and had no idea it was bad water. I recently had the charger for the UV light go out and warranty sent a replacement instantly. I recommend APEC to all my neighbors and friends. Great quality, taste and price. The setup was almost idiot proof just plug in a couple pipes and good to go.