Colour Name:Orange Note: Some types of OAT coolant can damage silicone hoses. All old coolant must be thoroughly flushed from the coolant system, and we recommend using Comma Xstream G30 for vehicles needing OAT coolant. IAT coolants and Hybrid OAT coolants are all safe to use with silicone hoses and if your vehicle is factory filled with either you should continue to use the original specification coolant. Please contact us to check compatibility if you are unsure. This high quality reinforced silicone hose kit replaces 14 coolant and breather hoses in the engine bay listed below. The hoses fit all manual Mx5 MK1 1.8 models. Upper Radiator Hose Lower Radiator Outlet to Hard Pipe Hose Lower Radiator Hard Pipe to Block Hose Heater Matrix Inlet Hose Heater Matrix Outlet Hose Thermostat Bypass Hose Thermostat Housing to Throttle Body Hose Radiator to Expansion Tank Hose Expansion Tank Overflow Hose Cam Cover to Intake Breather Hose* PCV to Inlet Manifold Breather Hose IACV Breather Hose Oil Cooler Inlet Hose Oil Cooler Outlet Hose * The kit includes the one piece cam cover to intake breather hose found on later models. If you have the earlier model with two hoses and a metal breather pipe running across the front of the engine you can either unbolt the metal pipe and use the longer hose, or cut a section out of the middle of the hose to give you the two shorter hoses and keep the metal pipe. The optional clamp kit includes two additional clamps for this purpose. Hose Clamps: The kit includes a full set of Stainless Steel W4 Worm Drive Hose Clips. These are good quality fully stainless steel clamps, with no perforations in the band and featuring a rolled edge, specifically designed for silicone hoses.
Trustpilot
3 days ago
1 month ago
