30/45/60 Degree Vinyl Cutter Blades, 40Pcs Tungsten Steel Lettering Blade with 1 Knife Block Housing, Cutting Blades for Roland Cutting Plotter

I purchased these blades for my Cricut Explore Air 2 cutting machine. Upon opening the packaeyge, the only flaw I noticed right away was the case that they were in was broken. The blades and housing appeared to be undamaged. All blades were there as stated in the description as was the housing. In comparison to my original Cricut blade housing, I noticed a very big difference in them. As you can see in picture # 6, the original Cricut housing is on the left and the one in this package is on the right. The one included in this package will NOT work in my Explore Air 2. I then inspected the actual blades included in this package and noticed no significant difference in the original Cricut blade (on the left in picture # 7) and the ones in this package (on the right in picture # 8). The blades from this package fit nicely in my original Cricut blade housing without any issues. Overall, I am happy with this purchase and would recommend these blades to be used in the Cricut Explore Air 2 machine. However, please note that the housing supplied in this package will NOT fit in the Explore Air 2.

As the headline states I wanted to add the ability to cut vinyl on my Atomstack A5 pro.This arrived quickly and in safe packaging.I had to create a 3d-printed bracket to attach this next to my laser. Using an adjustable Z axis screw to move the cutter up and down I can set the cut depth quickly. This inexpensive cutter essentially turned my laser engraver into a Cricut with a massive cutting area. I use Lightburn (software) and SVG/PNG files to easily drag and drop the images or design I want to cut.This also adds the ability to cut cardboard and card stock without burning (as the laser does).I was pleased that this comes with additional cutting blades of various angles. I hypothesize that these extra blades will last me for quite some time with the infrequency of my vinyl cutting.I would recommend this to others.

I wanted to see if this would work with any of the plastic adaptors for the Silhouette Cameo 4 instead of the CB09 or the autoblade. Based on images, this appears to be a Roland Blade 4 or 5 equivalent (12.5mm diameter, ~30mm from tip of housing to lip).Most people recommend the CB09 as a replacement for the ratchet blade, but mine was a bit too long (closer 31mm instead of 30mm) and would scratch the material on the mat even at its lowest setting, as I imagine the blade holder was much longer than the clearance allowed by the machine. This is supposed to be remedied by buying a 3rd party adaptor off etsy or ebay, but that's easily $15 alone.Just to note, the CB15 is a close equivalent, as the diameter is the same and the length is still 50mm total, but the length from the tip of the blade holster to the lip (shank?) is 1mm longer (@31mm), which may benefit those looking for a replacement blade that will have a deeper stroke.Otherwise, with the black adaptor (a bit wobbly in the blue one), it works in the silhouette. Which, for some reason, no one else has tried.

Good cutting

I didnt need the blade mount but figured it was a plus.. like most said it dont fit all cutters as in mine lol. But great value even though I can only use the blades.So still a 5 star

These have worked GREAT.... I have been using them for some time now and have only used 1 blade.

I used these with some attachments on my 3D Printer to cut vinyl masks for painting. The attachments allow using the cutter block where the printer head normally goes, then converted some images to .stl files to use on my 3D Printer. Once I dialed in the correct depth to cut this worked awesome, and I was able to print masks quick. I was using Oramask 813.

While I haven't tested the blades just yet. Quality seems to be okay but I am a little annoyed with the fact that I could have swore I ordered a black one. The silver housing does not fit and is significantly smaller than the current one I have. These listings need to be more specific with what is included and what they work for. It's hard to order something when everybody in the comment section says it'll work for my machine when it doesn't.

I bought these for my wife in hopes she would use her machine more if she had spare knives. So far not so much has happened. I can't say if they are good or bad because they are unused.

Great value for money.

The chuck is not good for my Cricut air 2 which was disappointing

As described!

This is not the item I bought.