Is the Removal tool included?

There is a white plastic nut which you put on top of the cartridge stem and wedge between the ears AFTER REMOVING THE RETAINER CLIP. Rotate the white nut 1/4 each way to unstick the cartridge in the valve body, then pull out with pliers. There are instructions in the package which show what to do. Having said that, I’ve had to take extreme measures twice on a cartridge firmly stuck in a tub/shower fixture. The Moen puller tool simply pulls the guts out of the cartridge, leaving the body behind. The trick to getting the body out is to run a 1/2 thread tap in the valve body and then put an 11/16ths socket with the open end on the fixture body opening. Run a 1/2 inch bolt through the square socket opening and tighten. The cartridge should pull out as the bolt is tightened. Greasing the O-rings with dielectric grease on the replacement cartridge before installation may help prevent it from sticking in the future.

Will I need the additional cost cartridge puller to remove old cartridge?

It depends on how tightly the old cartridge is seized in the faucet body, but generally if the cartridge can't be removed by rotating it 90 degrees with the included plastic tool and then pulling it out with pliers, very likely the additional cost cartridge puller will not work but will result only in the center of the cartridge coming out. Then the outer portion of the cartridge will have to be pulled out with an Easy Out extractor bit or a bolt and a wooden dowel. The latter method is very effective but first requires cutting threads into the seized cartridge portion with a 0.5" or 12mm tap (oil the tap) for at least 2" and then inserting a 3/8" diameter wooden dowel, approximately 1.5" - 2" long, then tightening a bolt at least 3" long and with threads matching the tap so it presses against the dowel and makes the bolt pull out the remaining part of the cartridge.

Does this also work in a Moen Posi-Temp tub-shower push-pull valve?

This is not a posi-temp cartridge.

Is there a difference between the Moen 1200 replacement cartridge the Moen 1200b cartridge for single handle faucet?

Basically, the 1200 is for single handle faucet's made before 2002 The 1225 model is for faucets made after 2002. I am not familiar with the 1200 B

Desertcart Logo

Deliver to Romania

For best experience Get the App

DOWNLOAD THE APP

WE SOURCE ITEMS FROM

UAE
UK
India
USA
Japan
KOREA

Customer Services

About Us

Customer Support

Description

🔧 Upgrade your faucet game—because leaks are so last season!

BACKED BY WARRANTY - Enjoy peace of mind with Moen’s limited lifetime warranty protecting your investment.
BRASS BUILT TO LAST - Premium brass construction ensures long-lasting performance and corrosion resistance.
FIX DONT REPLACE - Save money and reduce waste by repairing your faucet instead of buying a new one.
AUTHENTIC MOEN QUALITY - Genuine OEM replacement guarantees perfect fit and reliable function for Moen one-handle faucets.
EFFORTLESS DIY UPGRADE - Designed for hassle-free installation—get your faucet running smoothly in minutes without a plumber.

The Moen 1200 Brass Single-Handle Faucet Cartridge Replacement is an authentic OEM part designed for quick, easy repairs of Moen one-handle kitchen and bathroom faucets. Crafted from durable brass, it ensures long-lasting performance and comes backed by a limited lifetime warranty, making it the smart, sustainable choice to fix leaks and restore smooth handle operation without replacing the entire fixture.

Specifications

Material	Plastic
Brand	Moen
Color	N/A or Unfinished
Product Dimensions	7.5"L x 2.62"W
Exterior Finish	exterior_finish
Special Feature	Easy to Install
Included Components	Replacement Parts or Service Kit
Item Weight	0.17 Pounds
Metal Type	Brass
Handle Material	Brass
Customer Package Type	1
Unit Count	1.0 Count
Number of Items	1
Manufacturer	Moen Incorporated
Item Depth	6.4000
Handle Attachment Mechanism	Screw or Clip
UPC	076335016306 026508012000 026508005019
Part Number	1200
Item Weight	2.72 ounces
Item model number	1200
Is Discontinued By Manufacturer	Yes
Size	Pack of 1
Finish	Unfinished
Item Package Quantity	1
Number Of Pieces	1
Number of Handles	1
Special Features	Easy to Install
Batteries Included?	No
Batteries Required?	No
Warranty Description	1 Year Limited
National Stock Number	4510-00-006-0061

Reviews

E**N

Good product.

Fantastic, worked perfect. Get the puller for $12 makes it so easy. Clean the inside with fine sand paper before you install new one, and I wish they included some silicone grease but I found some in the garage.

29.10.2024

K**S

Bought the Used Model

I wanted to save a few bucks, so I bought a used Moen valve. The old one was 48 years old, installed when the house was built. I was wary, but logically how can it truly be used, then returned? I figured the problem was it was the wrong part, and someone opened the package, discovered it was wrong, and returned to Amazon. I think I was right. It worked great, and no more drips while the valve is off. So, I either got lucky, or I was right. I’ll be dead before it needs changed again. And kudos to Moen for making this design. It’s like installing a new faucet, without having to tear out the shower wall.

12.02.2024

L**C

Genuine Moen replacement part.

genuine Moen replacement part. Glad it was same day delivery, great service!

3.09.2025

V**A

It fits.

Old one popped out with a bit of work. This popped in place easily. It fits and it saved me a call to a plumber or a trip to a big box store.Second one I've purchased. Will buy again should the need arise.Be sure and make sure you buy the correct model.

20.06.2025

J**.

Faucet repair, you’ve been putting off!

Works great!! a little tough getting the old one out. Clean the inside with a little emery cloth into brass polish man what a difference should have done is a long time ago works great thanks guys.

7.02.2025

A**R

Durability

Best on market

14.08.2025

R**H

Good solid product. Worth the extra cost for the brand name.

Easy to install for a DIYer. They have a long lifespan of 15 to 20 years. If you have a badly stuck valve, spend a few bucks to get the tool to pull out the old valve.

10.02.2025

J**C

Good, solid repair part.

This is a high quality and well made product. The alternate is a plastic valve and they are not as durable.

8.07.2025

Common Questions

Are the products genuine and authentic?+

Yes, all products are sourced directly from authorized retailers in the US, UK, UAE and India. We maintain strict quality control processes and verify each product before shipping. All items come with applicable manufacturer warranties and are covered by our standard return policy.

How long does delivery take and is it reliable?+

Delivery times vary by destination country, typically ranging from 3-9 business days. Each order is fully trackable through our system. We handle all customs clearance and use reliable courier partners for last-mile delivery. You'll receive regular updates about your order status via email and our app.

What is Desertcart? Is it safe to order from?+

Desertcart is an international e-commerce platform operating since 2014. We securely process thousands of orders globally each day. Every product goes through our quality verification process before delivery, and we provide end-to-end order tracking, 24/7 customer support, and a comprehensive returns policy to ensure a safe shopping experience.

How is product pricing calculated?+

Our prices include the product cost, international shipping, import duties, customs clearance, and local delivery charges. We handle all customs and import procedures, ensuring there are no hidden fees upon delivery. PRO members receive additional benefits including free shipping.