RinGuard Ring Size Adjuster with Jewelry Polishing Cloth (Set of 3 Sizes)

I bought this set of ring size adjusters when my boyfriend (now fiance) proposed. The ring was absolutely beautiful, but I was terrified to wear it because just a simple swing of my arm would throw the ring up onto my knuckle! I'm about a size 6-3/4 or 7 and the ring I bought these for was an 8. I used the largest sizer and it worked for a nice, snug fit. For my ring and my fingers, the sizer was visible during normal wear but the clear plastic aspect made it not as noticeable. If it weren't for this sizer, I wouldn't have been able to satisfy all my girlfriends asking to see my beautiful ring!Issues I had with the size adjusters include sometimes being uncomfortable against the neighboring fingers since the spiral edges would rub up against the skin. It never scratched me since the plastic is soft, but it was enough to be annoying at times. Washing my hands also meant water would get trapped underneath the adjuster but that doesn't cause a performance issue, just slightly annoying when you want 100% dry hands. After prolonged wear, the adjuster does tend to creep up unevenly on the sides of the ring, but nothing a little wiggling downward can't fix. I did also notice that when I finally brought the ring in to get resized (I'd say about a month after the proposal), the adjuster didn't return to its original shape after being taken off. Not a big deal for me since I didn't plan on reusing it, but something to keep in mind.Would definitely buy again for cosmetic jewelry that are too large.

Seriously, the best sizer ever! I had extreme doubts prior to purchasing. I had already purchased a popular metal Sizer sold on Amazon. Unfortunately, somewhere between packaging and receiving, my item was drastically damaged/deformed. Since my husband is very good with fixing things, he was able to get this sizer on my brand-new ring. You could tell it was seriously messed up but it still did the job and surprisingly was comfortable. I am a perfectionist so I was not satisfied and ordered a new one and that is where I came across this. I had looked at adjusters like these before but didn't think much of them. I read the reviews for this one and decided to give this a try before I put another metal sizer or layers of liquid resin on my ring.My ring is a custom made ring that I designed and has a 4 carat fancy yellow round center diamond surrounded by a halo design with a semi split shank. There are a few small added extras to make it a custom design that I had copyrighted and that worked out for me well as I am making a fortune from other jewelers using it.I had it made in size 7 as I do everything though I know my ring size is smaller. I always do this because anytime I go into the jewelers and try on a ring on display, it always fits. As most people who have ever been to a jewelers knows that the standard size for all rings on display is a size 7. They do this for a reason. I also did this for the time during the month I would bloat. The ring graduates to about a 3 mm bottom shank. I have other rings like that that fit but are loose. This one however is so top-heavy that the ring was spinning and would have just flown off eventually. I had to do something urgently and I do not want to have it sized if I do not need to. To size it properly, they need to remove every single stone, then size it and obviously replace the stones. Because of the cost of this ring, I really want to avoid that if at all possible.Now we come to this. I bought this along with the replacement of the metal Sizer. I have prime and a warehouse 30 minutes away where Amazon ships from. I can be quite impatient about certain things so I overnighted this one and sent the metal one regular free two day delivery.I am extremely thankful that they sent three different sizes because I was already assuming the small one would have been the one to do the job. That is the first one I put on. It fit nice but it did not fulfill the sizing needs I needed. I needed to go down at least one full size. After I put on the smallest one and tried it on my finger, I removed it and went straight to the largest. The largest was the perfect fit and sized my ring Exactly as I needed it to be. It was comfortable from the first second I placed my ring on my finger and it literally is not noticeable. It is basically invisible. No exaggeration. My only problem with it was that because I had to use the largest wrap, it was covering a few of the diamonds on each side of the ring as I have diamonds going down at least half of the shank on both sides. I decided to take it off and rewrap it.This time, I took my time and pulled very hard before I wrapped each time leaving no spaces in between. That way, it gave me an even better sizing for my ring and came just below the diamonds on the side. There were no gaps in between each wrap. This is truly the best thing ever! I LOVE ❤️ it! I am a perfectionist and can be very critical. I just say it how it is. If there is something wrong with any item, I confront the issue as kindly as possible but I believe in getting what I pay for and what is promised. All I can say is.....I ABSOLUTELY LOVE IT! I am a such perfectionist to where if something has the slightest thing wrong with it, it will drive me absolutely nuts! This does not do that so I am VERY happy! 😁It looks great because you can't see it, it is SO COMFORTABLE that you can't even tell it's on AND it has corrected my sizing issues COMPLETELY! I would definitely recommend this to anyone and everyone I know and those that I don't, like you...yes, you! Right there in the black sweater reading this. This is for YOU! 😉You seriously cannot go wrong with this adjuster. I will never go to any other adjuster ever again. I have been through the liquid resins where you have to apply thin layers at a time and use a UV light. I have been through the traditional metal adjusters which work very well and are comfortable but this product absolutely beats everything on the market! I have to say, I had MAJOR doubts about this even prior to purchase. When I opened the package, I still had very low expectations, until I tried it.Take this from someone who has literally tried just about everything out there and from someone who has to have it perfect or will not be satisfied and would continue to look until I found the perfect thing. That is what this is! PERFECTION!💯% ❤️❣️❣️❣️I am SO HAPPY I tried this! Especially because I have just received a lot of my parent's jewelry from their estate. That part I wish I could change. 😢 Since every piece is custom and some heirloom pieces from my grandparents and great grandparents that are just too big for me but I would never resize them. They are too dear to my heart and are all I have left. This adjuster lets me wear those pieces whilst keeping them intact.I hope this review has helped you and I will upload a few photos to show you how amazing this is though you probably won't be able to see it. 😉 (That's a good thing!)10 🌟'S and 👍🏻👍🏻 LOVE ❤️ LOVE ❤️ LOVE ❤️ALSO KEEP IN MIND, YOU ARE ONLY SPENDING LESS THAN $10.00 FOR AN ITEM MADE FROM PVC WHICH IS EXTREMELY DURABLE AND LONG LASTING. WITH THE PROPER CARE, JUST ONE SHOULD LAST YEARS, AT THE VERY LEAST, WHILE ALSO GIVING PEACE Of MIND AS WELL AS POSSIBLY SAVING YOU THOUSANDS TO HUNDREDS OF THOUSANDS! I THINK LESS THAN $10.00 IS AN EXTREMELY SMALL PRICE TO PAY FOR PERFECTION!

This product is decent. I think it is probably the best option for those who don't want to permanently alter their rings, like me. I didn't want to get my engagement ring resized or have those little metal balls soldered on because I thought it might damage the integrity of the ring or make it too difficult to put on. The RinGuard came with 3 plastic coils (I think) and I cut one of them in half to get the proper size. It was easy to put on and I haven't had any issues with it sliding off. It's not too noticeable physically (I forget it's there most of the time), but it's obviously noticeable visually, to me. I think it may have loosened up or something because my ring doesn't feel as tight as it did when I first put the RinGuard on. I will probably cut a longer piece and put that on.A few cons - lotions/creams get stuck between the ring and the RinGuard every time I use lotion or put in my hair product. I have to stretch the coil apart and rinse thoroughly to get it out. One time I had a reaction from my skin because of the RinGuard, but it was only once and hasn't occurred again. I'm not sure what caused it. I just had really dry/flaky skin below the RinGuard for about a day or two and it went away. See the photo.Pros - easy way to make your ring fit better without altering the actual ring. Easy install and removal. Easy to adjust based on your needsI've been wearing this every day for a month, 24/7. So far it has held up. We'll see how long it lasts. I guess this is a temporary solution, and I'll probably have to get my ring adjusted permanently eventually... But for now this works for me.