🚗 Upgrade Your Ride with GM Precision!
The GM Genuine Parts D6253E Turn Signal and Headlamp Dimmer Switch is a high-quality replacement component designed to optimize your vehicle's electronic capabilities. Manufactured to GM's original equipment specifications, it ensures a perfect fit and reliable performance for select GM models, including the Saturn Aura, Pontiac G6, and Chevrolet Malibu from 2004 to 2012.
Operation Mode | attribute not appiicable to product |
Current Rating | 12 Amps |
Operating Voltage | 12 Volts |
Contact Type | Normally Open |
Brand | GM |
Item dimensions L x W x H | 11 x 4.8 x 4.7 inches |
International Protection Rating | IP00 |
Specification Met | Oe (Original Equipment) |
Connectivity Protocol | X-10 |
Unit Count | 1.0 Count |
Number of Items | 1 |
Global Trade Identification Number | 00707773696347 |
Manufacturer | ACDelco |
UPC | 707773696347 |
Item Weight | 3.84 ounces |
Product Dimensions | 11 x 4.8 x 4.7 inches |
Country of Origin | China |
Item model number | D6253E |
Is Discontinued By Manufacturer | No |
Manufacturer Part Number | D6253E |
OEM Part Number | 20940369 |
T**Y
Works perfectly
I bought the genuine GM part rather than one of the cheaper copies. I've had some trouble in the past buying 3rd party parts. The GM part fit and worked perfectly, and was easy to install. I highly recommend.
T**B
OEM Replacement
Turn signal on 2012 Chevy Malbu LT wasn't functioning properly, so I replaced it after watching a YouTube video that showed me how. It was pretty simple and the new one works great.
B**E
The turn signal switch in my 07 Pontiac G6 has been busted for the better part of a year
I wish I would have bought this sooner! Repair it yourself!The turn signal switch in my 07 Pontiac G6 has been busted for the better part of a year. You don't realize how badly you appreciate something until it's gone. Thus has been my experience having to manually un-turn my turn signal switch after every turn, often times forgetting to, causing confusion and dirty looks from people at intersections.Finally, got my new ACDelco turn signal switch in the mail today. I received it within a few days with Prime membership. EASY TO INSTALL!!. I highly recommend doing it yourself.Removal (Pontiac G6):-Locate steering column shroud. (Between the steering wheel and dash cluster gauge. The turn signal switch is attached to shroud)-Pull top half of shroud away from bottom half. Lift it out of the way as much as possible.-On the bottom half of the shroud, are (3) bolt head screws. They are located up inside the (3) visible holes. Remove them.-Pull bottom half of shroud away from steering column. (Gently stretch the shroud apart at the tilt lock lever groove, removing it from around tilt lock.)-Your turn signal switch should now be accessible and you should locate the (2) white wire harness connectors attached to the turn signal switch.-The larger wire connector has a black lock strap that must first (gently) be pried up before connector removal.-The smaller wire connector is a pinch latch mechanism. Pinch and pull it away from the turn signal switch.-The turn signal switch has (2) lock straps. (1) on top. (1) on bottom. Push the tabs down using a small screwdriver, freeing the tabs from the straps.-Pull the old turn signal switch out.INSTALLATION:-Push new turn signal switch into its slot. You will hear the tabs click into the lock straps.-Push large wire connector harness into turn signal switch. Again, you will hear a click when it's in.-Push small wire connector harness into turn signal switch. Listen for a click.-Remount the bottom half of shroud to the steering column. Remember to stretch the tilt lock groove around the tilt lock lever for reinstallation.-Screw the bottom half of shroud back onto the steering column. (DO NOT OVERTIGHTEN. YOU WILL SNAP A SCREW)-Snap top half of shroud into bottom half of shroud, adjusting as necessary around the turn signal and windshield wiper posts on either side.-Turn the headlight switch of turn signal switch forward and smile at all the money you just saved by doing it yourself.NOTE: There is a video on YouTube of a guy replacing his turn signal switch on a Pontiac G6 as well, if these instructions are difficult to understand or you would prefer visual instruction. Also, the turn signal switch might feel rough or stiff in signal selecting, but it should smooth out during your first drive.
L**I
Very good stuff
It works.good quality.
G**R
My turn signal lever broke into pieces and was hanging down like a man with ED
I have a 2008 Saturn Aura XE 3.5L. My turn signal lever broke into pieces and was hanging down like a man with ED, lol. I received my turn signal today 10/17/2017 from Amazon at around 4 pm. I watched a youtube video on how to install it and it was so easy. There are 3 hex screws in the bottom which use a 7mm socket. Just use a regular ratchet with a drive socket adapter. I removed the bottom casing and the top plate just came off easily. I unplug the two harnesses connected to the switch. Then with a flat head screw driver you push down on the top and bottom clips that hold the switch in place and just pull it out, that's what she said, lol. Got the new switch, plugged the two harness back up, then slide the switch back into place until you hear the click, and reinstall back the top and bottom casing. When I finished i tested it out. It works perfect! Even the feeling and pressure when using the turn signal feels like a brand new car. You feel the difference right away. The light switch also works perfect. I am glad I purchased this OE AC Delco part for my car. Lets see how long it last since the box says it was made in China and not the US. But at least I can use my turn signal again and lights. Great purchase and would highly recommend.
A**K
Still working properly.
It's been over a year and this aftermarket unit seems to work just fine. Easy to install.
G**N
Works well.
Easy to remove the old one and even easier to put in the new one.
L**O
Good Product, Fits Pontiac G6
Good product, works perfectly on the 2008 Pontiac G6 and Chevrolet Malibu. The steering wheel column has a hard shell cover in two halves. Remove the three bolts from the bottom of the lower cover. The upper and lower covers will snap apart, move the lower cover out of the way. Unlock the steering column adjustment lever, and move the telescoping steering wheel towards you. Using a small blade screwdriver, depress the two retaining clips for the switch and pulling it out. Remove the electrical connectors from the old switch, and reverse the process to install the new switch.Should take less than 5 minutes to do. Remember to telescope the steering wheel out for easier access.
L**Y
quality and easy to install
the product was easy to install after review a you tube video ....
O**Z
Excelente Producto Original
Se la instalé a un Malibu 2008. El cambio es muy fácil de hacerlo, es quitar solo 3 tornillos y listo. La pieza es original y venía en su caja con los sellos originales de parte de ACDelco. La compré en 700 pesos, buen precio para una pieza original.
L**I
Easy to install, works perfectly. 2006 Chevy Malibu LTZ
Took 5 mins to install, if you've got the tools, youtube vids available for installation for beginners.
A**A
Como de agencia
La palanca es tal cual viene en la descripción del producto, el material se siente de calidad y resistente, vino en una caja normal, sin embargo tenia la etiqueta de GM Origianl parts, llevo un par de semanas usándola y como si nada, ningún problema y su funcionamiento es igual a la parte que se reemplazó
D**D
Excelente
Igual al original de mi auto Malibú ltz 2010. Original ac delco
Trustpilot
2 weeks ago
2 days ago