Hisencn Stainless Steel Gas Grill Burner Replacement, BBQ Tube Pipe Burner Parts for Costco Kirkland 720-0011, 720-0108, 720-0021, Nexgrill, Virco Classic Models, 16 1/2 inch x 6 1/8 inch,Set of 3

Seem to be OEM quality but time will tell. Fit perfectly in my old Kirkland grill. Works door as new for now.

Worked so well with my grill

Works great on my grill! Love it.

I have replaced the original burners on my grill twice, but I have never been very impressed with the replacement burners. In fact, I had just replaced the burners and after spending a couple hours trying to adjust the burner flame (lots of yellow tips), I gave up and removed them. In other words, I never even used them to actually grill anything.I thought it was probably time to replace my grill; but then I decided I would try one final time to get some decent replacement burners. Although given the very low price, I suspected that these Hisencn burners might be just as bad as the previous set; the low price also persuaded me to give these a shot--plus, if they didn't work, I could always return them (with free return shipping) during the 30-day return window.Upon opening the package, I was immediately impressed with the apparent quality. These burners felt heavier, and all three burners in the order were identical. This manufacturer welds a bar at the "top of the "U"" so that each burner is perfectly shaped. My prior sets of replacement burners never matched each other, with at least one of the burners appearing more like a "V" with a rounded bottom that a "U" with even sides--which casused hot spots and cooler spots over the grilling surfacce.I also pulled out a magnet to test the stainless steel. The magnet did stick to the threaded fastner with the wingnut and to the metal bar I described above; but it would not stick to the burner itself!!! My hope is that with a better quality of stainless steel, which these burners appear to have, the burners will last longer and will maintain a consistently good flame.The final measure of the quality of these burners, however, was their performance after installation. After making a minor adjustment on the shutter on the first burner I installed (and then matching that setting on the other two burners before installation), I gave them the flame test. It was sunny outside and after lighting all three burners, it was hard for me to see the flames. After shading the grill from the sunlight, however, I found out why. Every single burner along its entire lenght was producing a perfect blue flame. There were no yellow tips whatsoever. This was unbelievable--and far better than even the original burners.My grill is now like brand new--but even better!My only "nit" is that the threaded bolts welded to the burners extend out from the burner at a bit of an angle (instead of being perpendicular to the burner). Because of that, I struggled a bit to get the burner in place (it may be because of the design of my particular grill). With a bit of "jiggling" and pushing in on the bolt end, I was finally able to get the burner to slide over the orifice. Once that happpens, the burner drops down into place and fits perfectly, and is easy to securre with the supplied wing nut. The "pros" of these burners far outweigh my little "nitpick"; so I am still giving these burners five stars.

I purchased my Costco grill for 20 years ago, the original burners last 15 years .I purchase these new ones and install them they but only lasted one year. Within a year it rusted out all three burners developed large holes. I could not use them. I complain to the company and they sent me a new set but again the burned out within a year. The company was very nice and I was happy to receive the second set at no charge but they do not last very long.

Was easy to replace the old ones.

I was hesitant to buy these because one never really knows the quality of replacement parts, or how well they would fit. I feared that the steel might be an inferior grade, or thin and flimsy. What arrived seems identical to the original parts with one exception - these came with a wing nut to hold them in place rather than the original hex nut. If anything, that may make it easier to remount the burner.I put these in a Kirkland brand grill, model 720-0011, that is about 12 years old. The grill actually was made by Nexgrill. The original burners had large, gaping holes due to the deterioration of the steel which resulted in very uneven cooking. These solved that problem. It was a bit tricky to install these burners because the grill design does not have a lot of extra space for maneuvering the burners into place, but that is true of the original burners as well. With maybe five minutes of wiggling and twisting the first one lined up. Once one learns the trick, it is easier to install the others.I had feared my grill may have been nearing the end of its days. These replacement burners saved me many hundreds of dollars by extending its life.

Good fit but stud was broke off and not there on one and another was missing nut. I didnt notice until install. I just used them as is because of inconvenience of waiting for another.