WILLOWLUCKY AR6100e 6 Channel Receiver for SPEKTRUM DSM2 JR 2.4ghz Micro Aircraft Helicopter

Description

Description Overview At only 4.4 grams and 19.0mm x 30.0mm x 9.0mm (WxLxH), the AR6100E is the ultimate 2.4GHz receiver for most any small electric model from mini profile foamies to 400 class helis. Because it uses advanced DSM2 technology, it is only compatible with DSM2 aircraft radio and module systems. It also boasts a wide input range that allows it to operate with 3.5- to 9-volt electrical systems. Product Specification: Super light weight 4.4 grams DSM2 Technology Compatible only with DSM2 aircraft radio and module systems 6 Channel End pin connectors Short 30mm antennas for mounting convenience Binding Procedure 1. Put the binding harness into connector location marked BIND. Next apply power to the receiver. Receiver LED should illuminate it means bind is accomplished. 2.To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested).Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter. 3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of receiver will illuminate solid. All fail-safes should be programed correctly now. 4.Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn onand connect battery into BIND channel is recommended. All channels should function properly now. You may test fail-safe by holdingsticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions. General Notes: Only one bind procedure is required on a new receiver. Repetitive binding provides no extra security. Always remember to remove the binding harness after successful bind is completed. Package Content:(Send without retail package) 1x SPEKTUM AR6100E Receiver