1/4" OD Hex Standoffs (Female-Female) 6-32 x 3/4"/Brass/Nickel/Outer Diameter: 1/4" Thread Size: 6-32/ Length: 3/4" (50 pcs)

Decided to try my hand at a custom PC case and these stand offs are working out perfect for mounting parts that use 6-32 screws

Good product

I got the 10pk of 3/4" length but thought I'd drop my review here as well.These are very nice standoffs, well machined and nicely finished on every surface. Do pay attention to the information in the photos that says there is 3/8" of threading on each end. I really don't know the reason for this but they are tapped from each side rather than being tapped all the way through from one side like most of these are. Used for a motherboard you'll probably only want 1/4" or shorter mounting screws for the top side, but on the bottom side you'll need to calculate your screw length carefully so you don't run out of thread. I don't know if you could run a tap through one side to extend the usable thread length...they meet in the middle and there's no guarantee that if you advanced a tap that the threads on the other side would meet in the right place, meaning that you could totally booger up the other threads and still not gain depth on that one side. Also, these are a smaller 1/4" diameter hex (across the flats) which is perfect for motherboards. Similar through-hole standoffs that you might find at the hardware store are usually a slightly larger 5/16" diameter which may cause fitment issues on some motherboards. These made a one-off project a success and we were glad to find something rustproof that was stronger than brass while also using the slightly larger 6-32 threading.