50M LC to LC Outdoor Armored Duplex 9/125 SM Fiber Optic Cable Jumper Optical Patch Cord Singlemode 50Meters 160ft LC-LC

I purchased a 50m length (SC-SC connectors) in 2022 to use between two pieces of professional audio equipment. The very low price made the expense reasonable in the event it didn't work. Once I had the right media converters (the first ones I tried were wrong) in place, it worked flawlessly. I have since picked up a 200m length to use on shows where 50m is too short.NOTE: if you are using this to connect devices with SEND and RECEIVE ports, you MUST cross the connectors at one end or it won't work – SEND at one end goes to RECEIVE at the other. I've seen several negative reviews that I believe were because this was not done.

My concern is for the durability, they work great and claim to be armored, but I think a rabbit could bite the cable in half. It is smaller than one side of standard lamp cord. We have this one plus a 75m run installed, and to prevent animals from tripping on it or eating it (it runs through the woods), we buried it about 2 inches deep. Will update the review later on the result of this. The instructions say not to bury it but I think it is more likely to be damaged by deer kicking it or chipmunks gnawing it, than by being slightly buried.

I took a chance with this fiber. Wasn't sure it was going to work after reading some of the reviews. I bought 2 pieces. A 15 meter for testing and a 150m (492ft) for one of my customers. The fiber is well made for the price. My test piece I scraped the insulation away and found kevlar and what appears to be a stainless steel coil for armor protection. For my customer we ran this fiber up a tree, over the road, down another tree and through the woods. Yes we really did this. Then pulled it through 125 feet of 3/4" conduit. We did NOT use lube in the conduit. Had no problem at all pulling it. This is my new goto cheap fiber. So far very happy with it. Update-Bought another 100m meter section. Installed a pulling eye from another piece of fiber. Had no problem pulling 200ft through Raindrip 061050 5/8X500 Poly Drip Tubing, 5/8" (bought on amazon). Again no lube required. Just make sure the tubing is perfectly straight when doing this.

Works great. No issues with it at all

I purchased this fiber cable for a project I was doing at home. When I received the cable it was in a neat and clean package. I ran the fiber through the walls and such to a media converter and a fiber switch. From what I have seen so far, it seems to be holding up pretty well. I ran several internal lan tests from the fiber converter and the speeds I have seen are on par with what I would expect from this cable. This cable will work on MMF SFP if you are using ubiquiti gear. (I use ubiquiti gear at home). Overall its not too bad.

Easy connection and insulated exceptionally well insulated from pests and others.

Purchased this for a network connection between our house and pole barn, approximately 75 feet away. Tested the fiber with between two switches using HP X120 LC/LX 1310nm SFP modules and experienced no errors. Buried the cable in 3/4" Schedule 40 PVC, and has been running without error for a month now.The cable says "direct burial" in the description, but the jacket on the cable is very thin. I would ensure that the fiber has a smooth sand base and backfill around it if burying directly - I felt better using PVC conduit to ensure physical protection from crushing damage.Nicely terminated ends, polish looked good under 10x magnification, and connectors hold securely. Good value for the money.

I bought 40m length of this to run from my home to an outbuilding. I paired it with these converters from 10Gtek https://www.amazon.com/dp/B08BYN83SL?ref=ppx_yo2ov_dt_b_product_details&th=1 and all is working well.This is my first experience with fiber optics and my first lesson learned was that you need to reverse the A&B lines on one end to make this work. The lines will snap out of the dual connector clip and can be snapped in in reverse. Essentially you need a crossover cable for this converter.I buried this stuff in a shallow grave for about 50 feet across my back yard. Some Q&A I read on here says direct burial is not recommended. It is also ran it for about 25 feet under my deck and 25 feet under the outbuilding. We shall see how long it lasts! The cable is very small, maybe 3/16th of an inch in diameter and for what it is worth can be run (including the "Y" and ends) through a 1/2 inch PVC pipe which I used for a riser on each end.