EVIL ENERGY Oil Catch Can, Universal Baffled Catch Can Kit with NBR Fuel Hose, 300ml Aluminum Air Oil Separator Tank for PCV System Blue

Great Product. Some sharp edges, but very nice quality. Cut dogleg off supplied aluminum bracket with a hacksaw and bend at a 90 as shown. Mount to frame as shown with Honda bolt, then drill hole in bracket and car frame for second stability sheet metal screw (not supplied) Engine cover still comes off nicely. Engine dipstick and radiator reservoir 100% accessible. Hood prop clears oil can nicely and dip stick is easy to reach as is can bottom to spin off for maintenance. All hoses are relaxed with no pinch points. This method keeps original PCV hose in tact for quick removal in case of warranty work. O rings supplied are a little small, difficult to get over threaded fitting but they work. Be careful not to over tighten fittings or you'll damage the O rings. The coalescing steel wool supplied is plentiful, enough to change out 3 times. Overall a fun install. Highly recommended!

The media could not be loaded. I was able to set this up in our car. It has cut down on the oil burning from the pcv valve. The car no longer smells hot and it was very easy to set up. I added my own mark on the dip stick that comes in the catch can. All in all it comes with everything I needed. I did replace the pcv valve while I was at it. Great product and well made and designed. I obviously put some notes to my self on the canister to keep things strait when I was installing it.

The can itself is pretty good, but the hardware/accessories will make you get creative. Threw this in a '99 Miata with a supercharger. Easy enough to figure out how it all goes together without instructions.With some modification I got the stamped metal bracket in this kit bent to hold the can off the firewall a bit. Drilled out a hole on the bracket to fit over the stud which used to hold the clutch hardline. I had just removed the clutch hardline after replacing it with a stainless hose, so this can fit in that location pretty well.There was just enough hose in this kit to leave a few inches left over. Hose is not tight on the miata PCV or intake pipe, but with the hose clamps put on the vehicle side seem to hold vacuum (oem spring clamps fit on the catch can side). I used about a quarter of the steel wool - not sure why they include so much.Kinda wish the "oil catch can" wasnt imprinted on the lid, and could do without the dipstick. Looks a bit out of place with other engine bay components.

Great product for the money. Do your homework and read up on other catch can designs and you will find that this catch can rivals the higher priced versions. I had to manipulate the mounting bracket, but that was expected as a one version cannot conform to all installations. Overall, it looks great, works great and I have no negative comments....worth the money for my 2016 GMC Canyon application.

Easy Install works great and has multiple size inserts for different fits, the finish is durable and looks good even after months in the engine bay. the mounting hardware wasn't cheap it seems like it will hold up very well. The dipstick is a nice touch this thing really saves the air cleaners in my 84 Ramcharger!

Works fine, pretty decent little setup. Cant beat the price compared to some of the expensive brands pricing.

Nicely built, horribly vague instructions. Only one hose and 2 clamps included when 2 hoses and 4 clamps are required. Mounting bracket is poorly designed.

It works great as a universal kit. I have no issues so far.